WANTED Corering lamps 68 C body

[glenbeigh196]

Looking for a pair of cornering lamps for a '68 300. I think the New Yorker shared the same style with a different lens. There appear to have been some '67s with the same lamp as well.

 

[live4theking]

Have you checked with Murray B Park in Tiffin, OH?

 

[glenbeigh196]

Thanks, yes. Mr. Park has been my go to guy for parts for years now. Nothing at this time. Appreciate the thought. Normally, he's got pretty much everything I've asked him for.

 

[MOVE N UP]

1968 Newyorker and Newport share the same bezel/ lens units - they and are not compatible with the 68 300

However- the 1967 Newport and 300 units will fit the 68 300

 

[Ross Wooldridge]

DVAP.COM shows this with cornering lamps:

1968 Chrysler 300 4Door HT (#68CR8350B) | Desert Valley Auto Parts

 

[glenbeigh196]

CR8350B is available as a "whole car" only. Not for parts I'm afraid. Thanks for the thought. Much appreciated.

 

[glenbeigh196]

1968 Newyorker and Newport share the same bezel/ lens units - they and are not compatible with the 68 300

However- the 1967 Newport and 300 units will fit the 68 300

Much appreciate being pointed in the right direction here. I was going from photos, not a proper part number cross reference. Thanks VERY much.

 

[glenbeigh196]

DVAP.COM shows this with cornering lamps:

1968 Chrysler 300 4Door HT (#68CR8350B) | Desert Valley Auto Parts

I emailed them to ask if they might have the parts outside of wanting to sell me the entire car, which doesn't look TOO bad BTW.

 

[Ross Wooldridge]

CR8350B is available as a "whole car" only. Not for parts I'm afraid.

Too bad - however, DVAP often has inventory that's not shown on their website. They're always worth a call.

Try Wildcat in Sandy Oregon, too.

Best of luck!

 

[Ross Wooldridge]

eBAY 300 Cornering lamp bezel and lense

 

[blue88]

Update.. i live close to you. ..i checked.. the 68 300 i have.. must have replacement fenders.. no markers.

 

[58Special]

The cornering lights were optional. My 67 300 never had them. I've found a pair in rough shape. Hesitate to cut holes in beautiful painted fenders. Wiring is there for them