Exactly What Wheels & Tires Fit C Bodies?

Post in thread 'C-Body Wheel and Tire Survey.

C-Body Wheel and Tire Survey

owner reports 215/60 15x7 wheel in front, 275/60 15x10 wheel, 5.5 backsp. in back, no modifications for fitment.
IMG_6594.jpeg
 
Post in thread 'C-Body Wheel and Tire Survey' C-Body Wheel and Tire Survey

Five-spoke American Racing 17″ wheels are mounted with 215/55 Mastercraft MC-440 tires up front and 235/55 Pantera Touring CUV A/S tires.

Backspacing not listed. Nor is rim width, but tire size max recommended rim width is ~8.5 inches - eyeballin' these suggests at least 7 inches.

IMG_0525.jpeg

1956_dodge_lancer_lancer-5-68181.jpg
 
Last edited:
1966 300

Owner reports "Rev 17” x 7” wheels, 0 offset 4.5” backspace 235/55-17. Not even close to rubbing anywhere even after dropping the front 3”

1708176971042.png
1708177026956.png
 
1967 Newport

advertised to have 17x7/8 Torg Thrusts (staggered sizes front vs. rear), mounted to 235/55 tires. No backspacing given.

1708366331524.png
1708366352387.png
1708366368422.png
 
1968 Newport. (sorry - might be here, however, as Cragar S/S's are an old school staple that comes up a lot).

Only spec disclosed was 235/70-15's all around, eye-ballin 'em look like standard offset (~4.0 inches), and 7 inch width. If so, all should be fine with that combo in my experience.

1708453381102.png
1708453413710.png
1708453519618.png
 
Last edited:
Those rear wheels have the appearance of the 15x8 Ramcharger wheels, which have 4" BS.
agree, thats how it looks.

much deeper (more backspacing than that) my experience with that tire size in back you'll get interference. directly or if not by body roll.

maybe owner (@ATw) will see this and report the real deal.
 
Back
Top