Front sway bar pictures

[Troy88]

Hey guys. Tried a search but no luck. Are the sway bar link pictured here a stock set up and are they supposed to bent on one side? Obviously all of it needs replaced, just trying to fit the new engine and wondering if this is going to be different in the end any way.

 

['66 Fury I]

Both links are bent. Easily straightened. Lindsay

 

[HWYCRZR]

In ‘68 they were straight.
Those look extremely bent. The bends don’t match from side to side.
Not sure what year you have there.

It’s time for new bushings as well and an alignment.

 

[Troy88]

Sorry, it's a 66 New Yorker.

Yes all the suspension is getting redone.

 

[MetalManiacAZ]

Totally bent. Mine were the same way before I replaced them.

 

[MetalManiacAZ]

One word of advice: if you intend on straightening and reusing your existing links, spray the ever loving crap out of those nuts on top with PB Blaster before removing them. I snapped off one of mine by hand on a completely rust free AZ car.

 

[413]

Before you spray any crap on them, wire brush off all the rust and dirt. Will go much better.

 

[Rainy Day]

I have some good used straight rustfree sway bar links. Send pm if you need them.

 

[Samplingman]

Don't straighten suspension parts, replace them.

 

[Jim birkenshaw]

Where can I by new ones . I live in b.c Canada my car is a 1966 Chrysler 300 was originally a cali car

 

[Troy88]

Jegs

 

[JimmyG]

I just tried to find these on Jegs,...no luck. Anyone have a part, or item number? Application maybe? Any leads would be appreciated.

 

[MrMoparCHP]

Not cheap, as a wise old man once said, "if it is the only one it is the cheapest one".

NOS Mopar Sway Bar Bushings 1959-66 Models - Hiltop Auto Parts


Alan

 

[MrMoparCHP]

Cheaper, not sure I like the split bushing
https://www.oreillyauto.com/detail/...b0/moog-stabilizer-bar-bushing-kit/moo0/k7061


Alan

 

[bnz84]

Also here - PST

 

[1978 NYB]