fuel tank grommet

66furywagon

66furywagon

Well-Known Member
Joined
Nov 2, 2013
Messages
552
Reaction score
210
Location
indiana
[TABLE="width: 919, align: center"]
[TR]
[TD]New replacement gas tank filler neck grommet
  • Fits 1966-1978 C body cars (not station wagons)
  • Replaces the seal from the tank to the filler neck (almost always dried out and leaking) $20.00 shipped each 1
    this is a mopar part not after market


[/TD]
[/TR]
[/TABLE]

Picture 580.jpg


Picture 581.jpg


Picture 582.jpg


Picture 583.jpg
 
AHHHH yeah. Lookz like ah grommet to me. Somewhat used and ah little abused. Assuming you're looking for a new one try Year One. And we're thinking it iz ah C-body rite? It shouldn't make any difference with that grommet tho' 'cuz E, B, C, bodyz should all be the same. Just make sure you're talking to some one down there that can find their a$$ with both handz at the same time. They been hiring ah few no-nothin's the last couple yearz, Jer
 
Hey all,
I need to replace my 1975 chrysler newport fuel neck filler grommet... I already have the right grommet but how on earth do I get the neck out... Do I have to take the bumper off? The neck is loose but can't get the neck go through the hole...
Can't find the answers on internet, probably looking in the wrong places...
Thx in advance
 
Funny, that looks the exact same as what's in my 66-300, and It's for a 68 Dart, So, what's the point?
 
Timd1804 said:
Thx for your very helpfull answer... NOT
Click to expand...
I think what you fail to realize is that Mopar used a lot of interchange parts between all models of cars. If you can't understand that, then your welcome for the education!
 
I think the point was that I asked for "help" with my 75 chrysler and you didn't help me. No, instead you gave a pretty useless answer. But no hard feelings... it's probably not your fault....
 
Timd1804 said:
I think the point was that I asked for "help" with my 75 chrysler and you didn't help me. No, instead you gave a pretty useless answer. But no hard feelings... it's probably not your fault....
Click to expand...
You have to drop the tank to remove the filler tube and replace the grommet.
 
Timd1804 said:
I think the point was that I asked for "help" with my 75 chrysler and you didn't help me. No, instead you gave a pretty useless answer. But no hard feelings... it's probably not your fault....
Click to expand...

How did I not help you? They're all interchangeable. How is that useless info? Do you think that little rubber washer between your sending unit and gas tank are model specific? If you can't see that, that's your problem, not mine! No fault on my part here, just tryin to help. Good Luck
 
I know they are interchangeable... i have the part I need. I just wanted advice on how to remove the neck/fillertube. And that part of the question you didn't answer...
Maybe re-read my post, I'm not the one who posted the pictures. I just used this topic to ask a question about the grommet.
Again, thx to commando1 for answering the question
 
BTW the grommet part number is 4002010 (the OP’s price shipped is less than list price, so it’s a good deal). I just bought four at the dealer. It is NOT identical to early C and B bodies. I have no knowledge about if it would work on those but I suspect that it would, although it would be obviously wrong if anybody cared to look. It is absolutely correct for formals; it is the original part number.
 
Last edited:
Hi, I recently had to do this on my 68 300. Looks like the same part. On that model, the filler neck is accessible through the license plate and the grommet and filler neck fuse over time. It was difficult to pull out, but with some WD40 and a lot of wiggling back and forth, it did pull straight out the back after removing the clamp that holds the filler neck to the body of the car. I'm not familiar with the layout of your model and whether the filler neck is accessible through the license plate at the back or not. Hope that helps a little.
 
Thx. It is indeed accessible through the license plate but I still had to lower the tank to be able to remove the neck...
I got the job done. Me happy now:lol:
 
You must log in or register to reply here.

Similar threads

azblackhemi
Imperial Fuel Tank Grommet
Replies
6
Views
2K
garyh
garyh
W
Fuel tank drain plug seal
Replies
14
Views
2K
WikedPlymouth
W
M
  • Locked
WANTED 77 Town & Country - need fuel tank
Replies
2
Views
691
mantonas
M
68HemiRR
  • Locked
For Sale Fuel Neck Filler Tube Grommet
Replies
0
Views
561
68HemiRR
68HemiRR
3
Does anyone have a 1966 parts diagram catalog?
Replies
3
Views
2K
Sixpactogo
Sixpactogo
Back
Top