i am starting this thread for encouragement as well as technical support as I have jumped head first into completely rebuilding the front suspension on my 1969 Chrysler 300 and at the same time upgrading the front drum brakes to 1973 spindles and discs.
I would thank commando1 for his very complete front end rebuild thread which you can find a link to below
Front end rebuild - complete.
I would also like to thank zymurgy as it is also a very complete post that you can find here:
Rebuilding the entire front end.
I ended up choosing a PST front suspension kit and steering kit that included inner outer tie rods leaves and a new pitman and idler arm. These were not cheap by any means but I wanted to do it ALL at once to minimize wrench time ... So I hope.
I would thank commando1 for his very complete front end rebuild thread which you can find a link to below
Front end rebuild - complete.
I would also like to thank zymurgy as it is also a very complete post that you can find here:
Rebuilding the entire front end.
I ended up choosing a PST front suspension kit and steering kit that included inner outer tie rods leaves and a new pitman and idler arm. These were not cheap by any means but I wanted to do it ALL at once to minimize wrench time ... So I hope.