For Sale HP Manifolds

[azblackhemi]

Left & right. No casting numbers that I can see so not sure what year. $250 plus shipping. Pm me here if interested.

 

[Turboomni]

What years were there no casting numbers?

 

[azblackhemi]

What years were there no casting numbers?

Good question. I have no idea so maybe one of the brightest we have here will enlighten us.

 

[Turboomni]

They look real nice,,any signs of the numbers grinded off? Were there any aftermarket manifolds at that time? Asking for the more experienced members to chime in.

 

[azblackhemi]

No signs of anything ground off.

 

[Mr C]

Looks like the heat riser has been worked on them too.

 

[azblackhemi]

Looks like the heat riser has been worked on them too.

The heat riser and flap have been taken out.

 

[70bigblockdodge]

Pre 70, no bosses on driver side for the heat stove for warm air to air cleaner.
Maybe low deck A body by looks of really curved outlet on driver side have to see a shot from rear.

 

[detmatt]

Very interesting, they look almost naked without numbers.
Are they C-body?

 

[commando1]

May be prototype Hemi Dart manifolds. $10,000.00

 

[tallhair]

Maybe you should talk to the A body site folks Chris. If big block A body they're pretty desirable

 

[Fratzog]

Strange. Anyone thinking about a TTI exhaust will need those numbers.

 

[detmatt]

They're definitely not A-body, the left manifold for a Dart is unmistakable.

 

[azblackhemi]

Compared the left side to another one I had and the outlet is a different angle.

 

[detmatt]

And what's the casting number on that one?

 

[tallhair]

B body pass side manifold exit angle changed between 69 / 70. Maybe did so on C bodies also .. maybe not same year though

 

[azblackhemi]

And what's the casting number on that one?

2951216

 

[commando1]

BBC... $1.98

 

[detmatt]

2951216

'70-1 C-body 383-4 HP. There's a different casting # for the 440 for '70-1. That slight angle change could make up for the difference in deck Hght.

 

[azblackhemi]

'70-1 C-body 383-4 HP. There's a different casting # for the 440 for '70-1. That slight angle change could make up for the difference in deck Hght.

Thanks Matt. So the ones I'm selling might be pre 70 C body?