Looking for good online parts souce for our C-Body Cars

[mr. fix it]

Since I'm relatively new to the C-Body world, I need to locate some reliable parts sources that are good parts but not going to break the bank.

Is there such a thing online?

 

[commando1]

You'll have to go to a myriad of sources depending if it's mechanical, body, etc. No One Stop Shopping for us guys unlike the A/B/E boys. If you're starting out, post what you need and there's at least one person here who can point you in the right direction.
For most of your general mechanical needs, start with RockAuto and work up from there.

 

[mr. fix it]

Thanks for the reply.

I know i can't get a complete floor pan kit..

 

[commando1]

Forget about sheet metal. Junk yards only, buy a donor car, or fab your own. No Plug 'n Play for these cars.

 

[polara71]

Stan said it all.....nothing more to be said

 

[Mr onetwo]

You can get floor pans and the trunk pan at Rockauto...they have 5% off internet coupons also. http://www.rockauto.com/catalog/raframecatalog.php?ck[

 

[70NPORT]

.....and this is exactly why ya have to love c body cars.

 

[commando1]

You can get floor pans and the trunk pan at Rockauto...they have 5% off internet coupons also. http://www.rockauto.com/catalog/raframecatalog.php?ck[

You don't want those. Been discussed too many times to repeat it here.

 

[bluefury361]

You can get floor pans and the trunk pan at Rockauto..[

The Rockauto sheetmetal and the C body sheetmetal you find on ebay are just a cut above flat stock sheetmetal. Nothing near OEM and have to be made to fit.

 

[Dodgeboy38]

I don't know if anybody knows but when I replaced the floor pan in my 67 fury III this place http://c2cfabrication.com/ had the pan I needed and it has the ribs in the pan as well as a place for the body plugs. and it fit relatively well, considering this was my first real replacement. I posted pictures of it on my "build" thread. Note: I trimmed my floorboard down as to only replace the heavily rusted areas, not the whole floor board

 

[Big_John]

You got lucky. The pieces I got were crap.

 

[Fratzog]

Here's a few places to try.
http://www.wildcatmopars.com/
http://www.dantesparts.com/partsforsale.html
http://www.cbodies.com/
http://www.nationalmoparts.com/

 

[mr. fix it]

cool... Thanks!

 

[mr. fix it]

I don't know if anybody knows but when I replaced the floor pan in my 67 fury III this place http://c2cfabrication.com/ had the pan I needed and it has the ribs in the pan as well as a place for the body plugs. and it fit relatively well, considering this was my first real replacement. I posted pictures of it on my "build" thread. Note: I trimmed my floorboard down as to only replace the heavily rusted areas, not the whole floor board

cool... Thanks!

 

[Big_John]

C2cfabrication is the same company that sells to Rock Auto and is on ebay.

Don't do it.

 

[mr. fix it]

When the time comes, I'll weigh the pro's n' con's out. Thanks for the input!:sSig_thankyou: