Original rims needed for my 1970 Fury

[Plymouthcustom]

Hi All:
I'm looking for an original matched set of four for my car. I don't know what the part number stamped above the valve stem would be, can anyone help? This is not a wagon. Assuming they are 15x6.5", the parts book says it should be: 3004 990. Is that correct? Any help would be great!! Thank you.

 

[413]

You say your from Canada, can you break that down a bit for us?

Shipping is going to be bad from the USA so Canada is your affordable source. I have 4 15x6.5's but west coast USA is far from most car guys.

 

[Plymouthcustom]

You say your from Canada, can you break that down a bit for us?

Shipping is going to be bad from the USA so Canada is your affordable source. I have 4 15x6.5's but west coast USA is far from most car guys.

Four with identical dates stamped into them? If so, what is the date? This car is super early production, August 18, 1969. An what is the part number? And, as the initial post asked, is that part number the correct one? What is the difference in that number and 2944 155, the part number listed for wagons? 59482 in Montana is where they would be sent to.

 

[6PKRTSE]

I have no idea what part # mine are, but they are my favorite Sea Body wheels.

 

[Plymouthcustom]

I have no idea what part # mine are, but they are my favorite Sea Body wheels.

View attachment 745134

View attachment 745135

The ones I am needing are steel wheels, to go with the full size wheel covers 2881 775.

 

[Plymouthcustom]

The ones I am needing are steel wheels, to go with the full size wheel covers 2881 775.

These:

 

[Plymouthcustom]

These:

View attachment 745137

View attachment 745138

Parts book page.

These:

View attachment 745137

View attachment 745138

Parts book page.

 

[413]

Four with identical dates stamped into them? If so, what is the date? This car is super early production, August 18, 1969. An what is the part number? And, as the initial post asked, is that part number the correct one? What is the difference in that number and 2944 155, the part number listed for wagons? 59482 in Montana is where they would be sent to.

No, 3 the same and one different. Not 1969 wheels. Early 70's

 

[Plymouthcustom]

No, 3 the same and one different. Not 1969 wheels. Early 70's

Do they have a part number above the valve stem hole? Could you post a picture?
Thanks.

 

[Toolmanmike]

Hi All:
I'm looking for an original matched set of four for my car. I don't know what the part number stamped above the valve stem would be, can anyone help? This is not a wagon. Assuming they are 15x6.5", the parts book says it should be: 3004 990. Is that correct? Any help would be great!! Thank you.

Find the number of the wheels you need and start a Parts Wanted ad in the Marketplace forums. That's how we do it here.

 

[67valiant 100]

Do you have the broadcast sheet? There are several different steel rims available depending on options. The sheet will tell you the correct part # youre looking for. Unless you have a wagon, youll be looking for either a 15x5.5 or 15x6 rim.

 

[Plymouthcustom]

Find the number of the wheels you need and start a Parts Wanted ad in the Marketplace forums. That's how we do it here.

I plan to do that, but until I know for positive which rim i'm needing, and what the differences are between those two part numbers, or maybe the rim isn't even a 15x6.5" one,......?! I'm looking for information right now, so I can make an intelligent parts wanted ad.

 

[Plymouthcustom]

67valiant 100: No sheet. The other issue is: Super early cars for 1970 had rims with no part number! It isn't as easy as it seems.

 

[67valiant 100]

Any paperwork? Window sticker? Even the tire size decal in the door jam will give clues as to what it had originally.

Generally base /6 cars got 15x5s, 318-383 cars got 15x5.5s & 440 cars typically got 15x6s.

 

[Plymouthcustom]

Any paperwork? Window sticker? Even the tire size decal in the door jam will give clues as to what it had originally.

Generally base /6 cars got 15x5s, 318-383 cars got 15x5.5s & 440 cars typically got 15x6s.

And obviously some got 15x6.5’s according to that sheet from the parts book.
No paperwork, no sticker inside the door.
Other cars got them too, see attached.

 

[Big_John]

From the FSM

 

[Big_John]

 

[413]

Do they have a part number above the valve stem hole? Could you post a picture?
Thanks.

2944155 on 3
No part number on other one 11-24-69