SPLASH SHIELDS AND KITS

[Affe]

I bought a kit for my NewYorker 1968 which had four flaps. Those were decent , the smaller ones I had to cut a little to get them identical
with the old ones.
These come on the inner side of the frame. On my car has been more flaps , the outside of the frame has one clip on both sides of the a-arm with the clips still there but nothing left of
these apparently small flaps.
Can anybody post a picture of these? It would be much appreciated..

 

[Affe]

I got it figured out on my own. Since the old a-arm flaps were missing I didn`t understand that the
left and right flaps go tucked between the inner fender and the frame. The new flaps were also without holes
for the clips.

 

[MoPar~Man]

Sorry, I saw your original post and was going to reply but I forgot. See these threads for info:

Confused about slab-era upper control arm splash shield

I have in my parts inventory this used splash shield: It's made from cord re-inforced rubber, smooth on both sides. There are 2 explanations for this item - that it's an actual OEM splash shield, or I cut it from a sheet of rubber using an actual OEM shield as a template. It would have been...

www.forcbodiesonly.com

1968 Newport Body Splash Shields

1968 Newport Chrysler: What vendors sell the rubber body splash shields that clip on top of the shock tower underneath the hood? Thanks!

www.forcbodiesonly.com

 

[Affe]

Sorry, I saw your original post and was going to reply but I forgot. See these threads for info:

http://[URL]https://www.forcbodieso...ab-era-upper-control-arm-splash-shield.86970/

[/URL]

http://[URL]https://www.forcbodieso...reads/1968-newport-body-splash-shields.88005/

[/URL]

Thanks for the answer anyway. I can see from the thread link you sent that others than me have had thoughts
about this topic.

 

[Affe]

Thanks for the answer anyway. I can see from the thread link you sent that others than me have had thoughts
about this topic.

Here are some pictures of the DMT 65-68 ones as they should be.