Hi all, drifted over here from the e-body side. I had an itch to scratch putting a TQ on my 440 I thought this would be the place to look for support.
I tried running it w/o a choke but have a hard time with warm starts so I decided to reinstall it. However, I don't know were to wire the heat assist, which I will most certainly need since I blocked my crossover. If I hook it up to were my 1411 electric choke was, which came right off the alternator I blow a fuse wired into the ignition switch.
I'm thinking a manual would be a btr way to go but they don't seem to have been designed with that ever in mind...
Jack
I tried running it w/o a choke but have a hard time with warm starts so I decided to reinstall it. However, I don't know were to wire the heat assist, which I will most certainly need since I blocked my crossover. If I hook it up to were my 1411 electric choke was, which came right off the alternator I blow a fuse wired into the ignition switch.
I'm thinking a manual would be a btr way to go but they don't seem to have been designed with that ever in mind...
Jack