Wheels again

Joined
Sep 12, 2022
Messages
198
Reaction score
70
Location
Kingsport tn
Don’t know the year etc but will these fit a fury and be right offset

DCA103A2-AC6B-4826-B046-DC8C3D62AFCF.png
 
Is that about an '05 Lincoln? If so, the bolt pattern is the same. The wheel should go on. The concern would be the offset. I've a hunch they might come real close to hitting the leaf springs. Not to mention that they'd look real goofy.

Also that center bore might be an issue.

I thought about trying this when I pulled a wheel off my 08 Cadillac STS and my 64 Newport was sitting beside it.... But then I just smiled at the joke.
 
Center hole too small, offset too far in.

Wheel may hit the toe outer rod ends.
 
Back
Top