Knebel
Senior Member
I have just installed my custom gauges and I have an issue with my Hazards. Its all wired pretty simply, all gauges and gauge lights share the same ground and power. Then I have a led for brights (which works just fine). And an LED for the parking brake. This one is seperate power and ground just like original.
The turn signal Leds however are grounded with everything else and receive the input just like before from the existing wires.
The issue I am having now is that if I am not on the brake and turn the hazards on, both indicaters are on solid. So are the fender marker lights (but not the turn signals!?). When I switch the turn signal switch to either side, the hazard flashers all flash.
When I do it with the engine off, same problem excpt it flashes everything...gauges on/off and gauge lights on/off. Like... the fuel gauge cycles on and off for example..
For power I used the black wire that was attached to the capacitor and got 12v on key on. Sooo... whats going on there, do the turn signal LEDs need their own ground? Its really not any different than them being grounded through the original gauge cluster. Scratching my head here...
Ignore my German talking but here is am example
The turn signal Leds however are grounded with everything else and receive the input just like before from the existing wires.
The issue I am having now is that if I am not on the brake and turn the hazards on, both indicaters are on solid. So are the fender marker lights (but not the turn signals!?). When I switch the turn signal switch to either side, the hazard flashers all flash.
When I do it with the engine off, same problem excpt it flashes everything...gauges on/off and gauge lights on/off. Like... the fuel gauge cycles on and off for example..
For power I used the black wire that was attached to the capacitor and got 12v on key on. Sooo... whats going on there, do the turn signal LEDs need their own ground? Its really not any different than them being grounded through the original gauge cluster. Scratching my head here...
Ignore my German talking but here is am example
Last edited: