For Sale 1963 chrysler parts car in a junkyard

challenger340

Active Member
FCBO Gold Member
Joined
Feb 10, 2014
Messages
200
Reaction score
99
Feedback: 3 / 0 / 0
I have access to this car in a junkyard. If you are in a hurry I may not be able to help you, as this will be a slow process, I only go to the junkyard maybe once a month. Small easy to remove parts will be around $50, larger harder to remove parts will be more. Prices will vary. Parts will be shipped from jacksonville arkansas 72076. No soft parts will be worth getting. About all that is left is hard type parts, like stainless steel trim parts. Car has newport on the dash board, but has a square steering wheel. Square steering wheel is very rough and likely not worth getting.

DCFC1480.JPG


DCFC1481.JPG


DCFC1484.JPG


DCFC1433.JPG


DCFC1434.JPG


DCFC1435.JPG
 
how are the c-pillars on this one
Are you asking about the sheet metal? Or the inner structural bracing panels? How big of an area are you needing? Thanks for asking, I am just just trying to figure exactly what you are needing, I can look closely next time at the yard. thanks
 
Are you asking about the sheet metal? Or the inner structural bracing panels? How big of an area are you needing? Thanks for asking, I am just just trying to figure exactly what you are needing, I can look closely next time at the yard. thanks
i am looking for the plastic panels the go over the pillars.
 
Is the part inside the car? I will do some checking next time, I go to the yard, maybe in 2 weeks. thanks willie
 
i am looking for the plastic panels the go over the pillars.
I did not see any plastic parts, There was some metal trim pieces that were at the bottom of the rear pillar on the inside, might be the lower trim for headliner. Maybe the plastic panels are gone already? Let me know if any of the photos show any info. There were some trim like this in the 64 car?

DCFC1531.JPG
 
Back
Top