Electrical issue again....this time I REALLY know what it is..

68blackbird

Active Member
Joined
Jun 8, 2014
Messages
469
Reaction score
207
Location
South Texas
been chasing this ongoing electrical problem, after replacing starter, relay, lights issues, radio issues, finally nailed it down. Cleaned all the wires on the inside firewall, went to check the outside firewall, found corrosion, thought I "fixed" it, nope...then there it was, the connector that hold the plug in place on the firewall is broke, and that is right where the fusible link goes. Now I just new a plug end...can someone steer me in right direction? Kel

IMG_20140626_201012009.jpg

IMG_20140626_201012009.jpg
 
been chasing this ongoing electrical problem, after replacing starter, relay, lights issues, radio issues, finally nailed it down. Cleaned all the wires on the inside firewall, went to check the outside firewall, found corrosion, thought I "fixed" it, nope...then there it was, the connector that hold the plug in place on the firewall is broke, and that is right where the fusible link goes. Now I just new a plug end...can someone steer me in right direction? Kel

View attachment 33340

THAT WILL DO IT!!! Congrats on finding it!:yaayy:

That good ole' fusible Stink!!!

For Starters, DelCity.net sells the Packard connectors
 
Nothing better than when you come across something that is clearly broken and solve the problem. Congratulations.
 
Back
Top