Replacement Bolts For Seat

[LocuMob]

I had to grind off 2 bolts and 1 broke on the seat from my parts car. Is there a proper replacement bolt or do I just use something from the hardware store? I have 1 stud to hold it down for my cruise this weekend at least.

 

[traintech55]

I have always used 5/16 carriage bolts with a retaining washer underneath the track to hold it in place putting it back in the car.

 

[LocuMob]

Is the original bolt tacked to the seat track? Friend told me they were and I have to looked that close since I got it free.

 

[Big_John]

The bolts were swedged over.

You could probably tack then with a MIG welder or as Bill says, use a retaining washer to hold it.

I've reached under the seat and put them in after the seat is in the car too.

 

[LocuMob]

I have always used 5/16 carriage bolts with a retaining washer underneath the track to hold it in place putting it back in the car.

Thanks for the tip, the bolts worked great!