Rear bumper guard repair

Harvey5

Member
Joined
Dec 9, 2016
Messages
55
Reaction score
42
Location
North Carolina
F447E19E-40CD-493B-A765-96C15ABE15DC.jpeg
E724C1F4-EC63-45E3-B9B2-567CE3698F79.jpeg
What’s the best way to repair these rear bumper guards? 1970 Fury Convertible. Thanks!
 
Make a silicone mold, and repop with epoxy might be worth a shot!
You would have to fill and smooth the original piece for a master, other wise you will just be casting flawed copies, also I don't think Epoxy would hold up or look right, you would have to look toward a urethane or flexible but rigid material.

It is a viable option, just not an easy one.
 
Look at Jan. 2020 magazine "Auto Restorer", there is an article on making rubber gaskets and plastic bushings.
 
For my front bumper inserts on my '68 Polara, I couldn't find any NOS or replacements. I ended up buying the spray Plasiti-dip. I would spray a couple of coats, let it cure and settle into the cracks, then sand. Repeat, Repeat, Repeat until most of the cracks are gone. Mine have been in place a year now. So far so good. I will see if I can find the link or pictures.
 
Thanks everyone for the input, even the scrap bin! Bumper has been re-chrome and looks great so I don’t want to plug the holes where they go and have to re-chrome or scrap bin would be an option. I think I can come up with something.
 
For my front bumper inserts on my '68 Polara, I couldn't find any NOS or replacements. I ended up buying the spray Plasiti-dip. I would spray a couple of coats, let it cure and settle into the cracks, then sand. Repeat, Repeat, Repeat until most of the cracks are gone. Mine have been in place a year now. So far so good. I will see if I can find the link or pictures.

will be patiently waiting! Would love to see how they look.
 
What about spray/dip and cure, and once it’s sanded and formed, THEN mold?
It would be in proper form
You would have to fill and smooth the original piece for a master, other wise you will just be casting flawed copies, also I don't think Epoxy would hold up or look right, you would have to look toward a urethane or flexible but rigid material.

It is a viable option, just not an easy one.
 
I wish. Have not found any.






That doesn't mean they aren't out there. They will pop up sometime, keep looking. I still haven't found a replacement for a damaged wheel opening molding on my 67 Polara, but I will......! These are 60's C body's, not 34 Packard's.
 
Here is the final product after plasti-dip spray and sanding. repeat ... And before at the bottom. (Proof I posted it in a thread somewhere) Not perfect but much better.
Soaked a couple of days in ammonia, supposedly it is supposed to bring the oils in the rubber back out to soften it up.

56EDBA15-0055-40D4-BD6A-19999B0174CB.jpeg
F43FCF64-CB72-43AA-BC89-5FD713815511.jpeg
FA28A07F-21F8-479B-AEAF-D29A00C85D95.png
 
Last edited:
A friend of mine restored the front rubber guards on his 1970 GTX some years ago. I'm not sure if they were in as tough shape as yours are though. I'll be seeing him on Saturday and I will try to remember to ask him about what he did.

Jeff
 
Back
Top