New C-Body Spindles for Disc Brakes.

[Boiler_Gawd]

He's a joke
All he did was take a e-body repop, and spread the lower ball joint holes, you should have seen the video he put online be-rating me for calling him out , he has and he has since removed it , let's not even talk about the the phone call, OMG if I could have recorded it , he called me every bad name on the planet

 

[live4theking]

Uncalled for. Thanks making this known to everyone.

 

[CHARLES374]

Uncalled for. Thanks manning this known to everyone.

Isn't he at Carlisle every year ?

 

[live4theking]

Isn't he at Carlisle every year ?

I've seen him there a number of years.

 

[Welder guy]

View attachment 367312 Here you go , the ram man spindles versus the proper c-body spindles, look at the height difference , and look at the caliper bracket bolt spacing , unbelievable that this moron is allowed to continue doing this

When you had told me about the height difference I knew it was bad but when you see the spindles side by side it tells the story. A little bit of knowledge is a dangerous thing ! Under no circumstances are you to weld on any steering parts on any automobile !!! The metals tensile strength changes completely and can cause catastrophic failure!!! This will void any and all insurance and leave you completely libel in the event of an indecent or accident. This was taught in welding trade school 35 years ago and still holds true today. Don’t walk away from those welded spindles,RUN away from them!!!

 

[Bvmarchisotto]

s), and as mentioned I have a fe

Any chance of selling a set?

 

[pomonamissel]

these spindles are not the only funny stuff ram man sells . and he would let you can him on his products , and blames all the errors on the customer and refuses to make it right . hunt up the oem stuff . i bought whole cars for everything that is needed to make the swap .

 

[pomonamissel]

just saw an ad parting out a 70 chrysler by @70DartMike the car appears tobe whole at this time .

 

['69FuryIIIConvertible]

Any chance of selling a set?

Considering the post you quoted is from 2019, No, because I've both used and already sold what I had.