good golly
New Member
I have no brake lights or turn signal on drivers side of my 65 sport fury. Tail lights are working. Any ideas on what is wrong? I have read electrical diagrams in fsm, but no help.
I have no brake lights or turn signal on drivers side of my 65 sport fury. Tail lights are working. Any ideas on what is wrong? I have read electrical diagrams in fsm, but no help.
Thanks for all the help guys. I got the lights to work yesterday evening by wiggling the wires under the dash. I either have a loose connection or something going bad.
Going to investigate further this afternoon. BTW, I hate electrical troubleshooting.
Who is this?There's a vendor of new fuse box clips, model specific for most of our rides. He gets about $40 for the set. I may one day avail myself of his wares. He sells brand new repop fuseboxes for $100.
Check out the brake light switch connectorThanks for all the help guys. I got the lights to work yesterday evening by wiggling the wires under the dash. I either have a loose connection or something going bad.
Going to investigate further this afternoon. BTW, I hate electrical troubleshooting.
And with mine, the Emer. Flasher works as advertised. Maybe I should go dick around and fidget with some wires, I might get lucky?
Who is this?
Who'd a thunk it? Thanx Gerald, that makes sense after all this time! My schematic says the pink wire from the box splices into a red wire that goes from the stop switch & light switch. The other side of the stop switch wire goes to the directional switch. But there's still a lot of wiring going through the signal switch. God, I hate electrics!
Check out the brake light switch connector
You may have wiggled it enough to make things work