Arm Rest Bases

[NCFury1963]

I found a couple of B Body cars in the salvage yard here and I wondered if the arm rest bases from a 69-70 Road Runner will fit on my 70 Fury III? I would have to pull them off to measure them and really didn't want to pull them off of the RR until I knew. Because I fear that if they didn't measure up, they may be messed up if I left them laying on the seat in the RR. I just hate seeing old car parts destroyed.

Thanks

 

[Big_John]

The RR bases are shorter.

 

[NCFury1963]

The RR bases are shorter.

Thanks. That is my luck.

 

[Carmine]

One of our member's father designed those pieces at Chrysler. He was quite proud that they were used from the mid 60s until the '00s (vans). You can also flip them over from side-to-side and expose the "nicer side" up after years of wear.

 

[marty mopar]

if your C body bases are stamped with 2589583 then there is a wide range of cars that used them. What is the casting # on yours??

 

[300rag]

... You can also flip them over from side-to-side and expose the "nicer side" up after years of wear.

Did that more than once.

 

[MrMoparCHP]

The ones on my 69 Polara (4-door) are 13" with a 9-1/2" pad and are used on B-Bodies.


Alan

 

[Big_John]

The ones on my 69 Polara (4-door) are 13" with a 9-1/2" pad and are used on B-Bodies.


Alan

I didn't realize the 4 doors had a shorter base. It makes sense.

I wonder if the Chrysler 4 doors also had the 13" base.

 

[tallhair]

I have some of the longer ones for C bodies but the chrome is no longer shiny

 

[NCFury1963]

I have some of the longer ones for C bodies but the chrome is no longer shiny

Do you want to sell those?

 

[tallhair]

Do you want to sell those?

Sure. I'll send you a PM/convo to discuss

 

[NCFury1963]

Sure. I'll send you a PM/convo to discuss

Sure. I'll send you a PM/convo to discuss

Thanks.