Search results for query: window replacement

I have no pictures and the car is now in my storage space. Otherwise, it looks like the pictures you can find in the factory service manual. Completely stock as Chrysler designed it. There might also be pictures in the illustrations of the Chrysler parts book for that model year, too. At...

I've been a little concerned about the alignment of the top for a while. When closing it, the locator pins on the latches would land about 1/2" towards the passenger side. It did seem to close fine, if I nudged it to the left, just before it closed. Everything latched fine, and the windows...

I'm usually hanging out on the FBBO page as FriendofVirgil. I'm looking for a core or a replacement, driver side preferred, but can use a driver or a passenger side to repair mine. Rear door and front door of either side motor housings are interchangeable but they ARE different. These are common...

This guy has motors for a decent price. These are new motors. Some need the drive gear, but that's pretty easy to source new replacement. Items for sale by dixiepowerwindow | eBay Power Window Motor Gear Dorman 747-411 fits CHRYSLER DODGE EAGLE JEEP PLYMOUTH | eBay WINDOW LIFT MOTOR (NEW)...

Correct, your window sticker says R38 which checks with the dealer reference I posted. Your current radio looks to be a 79-80 replacement from a Cordoba or something like that. Likely a dealer replacement for when the original radio died.

You guys are right. Money doesn't go very far these days so restoring cars (especially C-bodies) is almost out of reach for most of us. I called a reputable transmission shop in my area earlier today. Gonna take over to those guys to fix next week. Only thing left is that dreaded window roller...

Anybody familiar with window replacement- any chance I can get away with the original/existing clips?

do u have experience putting in windows on older mopars . they was put in with the butyl rubber welt they r hard to find & hard to use they use urethane caulk on the newer cars but dont use silicone latex caulk it will cause the window channel to rus . i was told this by a glass...

I just realized that America's Tire Company now offers a Nexen 235-75-15 in a whitewall and an XL load rating of 109S XL, which is even a higher load rating than the former Hankook Optimos which I recall were a 108S XL load rating. So I will likely order a set of these to try them out. I even...

So as an update, I found a bad relay that was holding out power to the windows. It was actually inside the drivers side cowl by the emergency brake next to a set of 3 breakers. Its the "Power Window Relay Mopar 3004187". I jump it out if I want to roll the windows up or down. Anybody know of a...

First off, thank you so much @rapidtrans for sending me that roller, that was supper nice of you. I am so frustrated though with the USPS! So I went out to my mailbox to find the flat rate box wrapped in plastic with nothing but a photocopy letter attached that looked like it was typed on a...

There is a time and place for gasket maker, but it shouldn't be too hard to do without there... for future gasket considerations, our friend Jer @BIGBARNEYCARS turned me onto this outfit some years back... great quality, installation requires careful attention to everything including hands...

We're on the same, page, paragraph and line! THIS motor RUNS when it runs, and we WANT her here. If I can just get the temperature to stabilize below a pressurized boiling point, preferably by at least 30 degrees Fahrenheit but even 10 will do, so long as its STABLE, then we can USE the damned...

My 77 T&C rear door seal is pretty beat. So is the window whisker on the outside. I realize NOS and repop don’t exist, but has anyone found a good universal replacement?

My rear motor has completely rusted to pieces. 1. How do it get it out, can't find any bolts. 2. Where do I get a replacement?

Interesting. They also offer them in 225/75R15 but the load rating is only 102S.

I'm trying to find out what window motors these are and a correct replacement. All I found during searches are the taller electric motor part and different gear drive setup. Any help would be appreciated. These are out of a 64 New Yorker part number behind the rubber isolator seems to be 2*212

Thanks a lot -- I had read that thread, and in fact I bought Meguiar's Plast-X on your advice and will be trying it this weekend on the (incorrect plastic replacement) rear window of Snow White, my 1970 Polara convertible. However, I was not sure that the bumpers could be polished this well...

Purchased this a decade ago and just never found the time I hoped to put into it. Rear-end was hit when I purchased it. A shade tree mechanic pounded it out and got the trunk lid sitting pretty square. The rear quarters and trunk had some holes that needed to be filled. A fiber-glass patch...

If the window motors are dead Dorman Products make replacement window motors. O'Reilly Auto Parts can get them. If you have any problems, PM me and I'll hook you up w/ a source.