Search results for query: HOSE!

It was common to plug the EGR vac hose back then, keeping the valve closed. Better throttle response, especially off-idle , as things got back to normal from what it was with the EGR valve operational. It would be more incognito to put a ball bearing into the vac line where it plugs onto the...

Sure seems that way. Maybe they put a hose inside the car and water them for a year or two.

I apologize I checked again I can see coolant coming from the box.

Thank you I didn’t use it so far it’s fine . Such a mixed bag of answers

For the short upper rad hose, a friend bought one of the coolant filters and installed.

Used and unused hose and brass fittings. $10.00 plus shipping from 61109. No electronic payment. Check or money order.

Hi Vaanth, What vendor sells these hoses? Thanks, Ben

Yep, gonna do all of that once it’s all vacuumed, charged and operational. A/C hose is pretty thick already but I’m gonna make sure it isn’t directly touching any metal. Thanks Ross!

Nice! I would try to move that hose that is above the condensor and touching the radiator yoke in several places away from the metal, as it may rub through. At least put something as a sort of barrier that will take the rubbing rather than the hose itself. Same with the one I can see on the...

Agree. Time to do some cleaning. Let's see: Remove & replace rear brake hardware, Remove and clean and install wheel cylinders. Clean out axle lines and distribution block. R&R rear brake hose. Safety switch block, Remove, blow out with air, and replace. Replace left front brake line and line...

I had a spare bypass hose lying around but was for my 73 wagon. I ordered and got the correct bypass hose locally for a paltry 18 bux. New clamps too. I will start pulling it apart once I get a new pump and nipples in my hands. Then I will discover the leak location. It leaks pretty good to the...

I don't think you want to change to a '70 up pump. First issue is the outlet is on the wrong side. Then the heater hose and bypass nipples are part of the casting and not separate screw in nipples. If the new nipple doesn't cure the leak, the earlier pumps aren't hard to find or real...

I'm having a hard time to find out how the routing of the hoses for a 63 Imperial PCV go. Maybe someone can help me out. As you see in the picture the open end is connected to the air cleaner which I think is wrong but cannot find anything in the FSM. From what I know the PCV usually has on...

I know hose is new and not clogged as is fitting on engine side. Pulling it off with engine running and putting my thumb there , there's plenty of suction and no collapsing hose.

My son owns a very nice '76 Buick Skylark with the 260/4.3L Olds V8 without air. He's had three occasions in which the upper radiator hose has blown clean off the radiator! The hose and neck are unharmed. And, yes, the clamp is super-tight. The hose is three years old, as is the aluminum...

Lately they have become a item needing asked for. Not included in cylinders or hoses kits

Usually heater valve is outboard, heater core towards center of vehicle 5/8" hose in 1966 1970 started with one hose 1/2" Chrysler didn't use 3/4" heater hose on USA cars in the 60's and early 70's

You're seeing things just as I see them there. Either that's a 3/8" hose going into that pump or a badly swollen 5/16" one. I advise our O.P. to get new, good quality rubber, not AutoZone's generic stuff. Gates Green Stripe was mentioned as a good standard.... I should check up on this, as...

Disconnect the inlet hose to the fuel pump and put the hose in a container of gas. If it pumps nice and strong, then you might have a blockage somewhere. It could be the line from the fuel tank or maybe the screen on the pickup is clogged.

Cool, thank you. If you had a leak in this hose, would it effect engine performance at all? I am tracing what feels like an intermittent engine miss.