Search results for query: window removal

I removed the wing vent motor and the entire side window bracket. It's a 1967 Crown HT. The shaft that connects the pivot to the motor needs to be removed in order to remove the glass from the triangle frame, which needs to be removed in order to replace the rubber and rechrome the frame. I...

I need to remove the passenger door glass on my 66 Polara convertible. The FSM states I have to remove the vent frame and door glass as a unit. I don't have enough hands. Is there any way to remove just the vent frame without the window glass? I need to replace the guide shoes and weatherstrip...

Will try the window trick, thanks! Fender removal is also a great idea but I would like to get it home first. Thanks for the post!

What constitutes a "high flow" water pump? As to "flow", there is a "window" of flow rates for BEST heat absorption by the coolant. To fast, not enough heat removed. To slow, strains the radiator to get it all removed before the cooland makes another pass in the engine block. The factory a/c...

I have not removed the top of the window opening trim as I found it is rivited in place in some spots under the drip rail, so I am planning on leaving it in place for now. The rest of the side trim comes off with a trim removal tool and some phyllips head screws. Its not real hard but patience...

I try to remove the vent wing motor from the left front door (motor is stuck). In the shop manual I read that the motor shall be removed through the large acess hole. And theres my problem: the chanels/track for the window is in the way! How do I solve this? Gustav

FlowKooler 1679 FlowKooler Hi-Flow Mechanical Water Pumps | Summit Racing I got mine on sale for half the price when I bought it 5 years ago. Works great when I'm sitting in traffic... is it a fix... I doubt it. I agree there are way more things to consider in cooling than the water pump, but...

Had a friend that does dent removal come over this morning and take out the inly dent on the car . Took the driver window regulator/motor out and went thru it . Works like a charm now . Replaced the factory 6x9s with a set of Rockford Fosgates . Still not a modern HiFi but much better ...

Once you take the door panel off, it is pretty easy to see what is going on. Take off your door arm rest (two screws underneath) inside door latch, and window handles. Then take a trim removal tool and pop each of the retainers around the door panel edges. Probably about 20 of them. Just...

For sale 65 -68 Power window full setup removed from a 66 New Yorker 4 door htp this is all four window regulators with motors all four door switches and complete wiring harness for all four doors before removal I know that the driver's front door worked as for the rest they are untested so I...

All: working some bugs out of my rear quarter power window assembly while winter is upon us. 67 Chrysler 300 rag top. Glass was sagging inwards and upon removal I found that the plastic roller on one side of the track slot was broken. I am hesitant to ask if this is a replaceable part, or does...

I have removed and inspected both mechanisms. They seem intact and want to move but the door lock can’t be pushed down and the key will not allow it to lock either. The key is correct for the lock cylinder so it makes no sense

The window motor in my '70 300 has failed. Yes, I've checked all the electrical... The problem is getting the motor out. It has failed with the window down and there is no coaxing it up. I've tried to remove the entire regulator and that's not going well at all.... I did a search and found...

So with the weather getting warmer in Mid-Michigan I'm going to start doing some body work and I'm debating on if I'm going to pull all the windows, seals and everything or just pull all the trim and paint the outer shell. I would prefer to do a full disassembly but I'm concerned about getting...

Thanks for all of the tips! I typed "quarter window removal" into the search bar and the only thing that came up was your response . . . oof! I'll figure it out. First things first, I need to do an inspection and see if there are broken parts or something. Then I'll go from there. Thanks again!

That's odd, I just typed "quarter window removal" into the search box and I got over 100 posts and still more after that! Wonder if you have to be a James Bond "Gold Member" to get the full meal deal? Just an FYI, if you are going to be around for a while on your rebuild, I would spend the...

...the regulator from the access hole on the inside bottom of the door and start looking it over. If you use the search button on this forum in the top right corner of the page, Just type in "quarter window removal" and there are quite a few links to people who have done this. Good luck! C Shaft

Currently stuck trying to remove the rear quarter glass window motor / regulator mechanism. Do I need to loosen any part of the window track in order to make clearance for the window motor? Or any tips you may have? FSM isn’t very helpful for removal of these motors…

As I said before, Tim is a good big brother! His help and knowledge on this adventure has been and will continue to be unmeasurable. Thanks T. Enough of that, back to work; Can someone post a good link that describes dashboard removal? The break booster has to come out and since I am taking that...

There may be more rust than what you see. Add 50% more rust damage to what you do see!! Water is entering the trunk and can rust out the trunk, edges of the wheelwell and backside of the quarter panel above the fender skirt. Rear window needs to come out-but before you do that make sure you can...