Search results for query: window replacement

A very rare and interesting car. I have just bought a 71 Fury Custom which is essentially a Fury 1 with a lot of extras including 360 V8, automatic trans, bright work, carpets, paisley vinyl interior and top, AC and much more. I sure wish my door cards were as nice!

I just read through the site history on the car. Apparently I found it frustrating the first time around. That has not changed. The car has been repaired some. But now the paint has been patched back again and the bubbling under the window under a replacement top is bad. That tells that the rust...

Thank you, but these won't work for the need. I will continue to search for the nylon replacement guide.

OTHER than the obvious powertrain issues, do NOT forget about the vinyl top issues! Once moisture travels though the aged vinyl covering, which is really a "coated fabric" situation, the moisture can then dampen the "backing" of the top fabric and hold that moisture there just like sane holds...

For the switches, it might be possible to rebuild yours. @Devinism has rebuilt dimmer switches for me -- superb work, fair prices, rapid turnaround. Your 'vert has the H53 AutoTempI -- it is a hard system to get right/reliable, as multiple threads attest, but some folks like @sixpkrt have had...

This isn't making any sense to me. The link was to the 300 club and a replacement part that they sell. No services offered. It looks like the plastic gear @Dan Scully posted, only done in brass (or bronze).

Unfortunately, those are replacements for the other rollers rolling around in this system The needed item has no aftermarket replacement (yet). I was hoping somebody would pop them out of a 3d-printer. Same problem with the clips for holding the trunk trim between the rear lights.

Looking for some help or suggestions. I need to either have repaired or find replacement. My window crank regulators for the back doors don't work. I have been trying to find a replacement but no luck. I also searched for repair places and the couple I contacted said no. Any suggestions on...

Call Murray Park. www.cbodies.com

NOS factory replacement panel for 1968 Imperial. This panel goes between the rear window and trunklid. Factory parts manual lists as "Panel - Deck Opening Upper" often referred to as the dutchman or deck-filler panel. Nice condition, some surface rust from sitting in storage. Part number...

I am working on my 1963 New Yorker and i need 2 window lift motors for the rear doors. Is there a Dorman lift motor that will work? i tried the Dorman 742-300 and it does not fit at all. The motor on the one door has a number on it 1964028. If i can find a replacement for that motor i would go...

Hello, Anyone know where I can find the replacement weather strip for the rear driver side window on my 73 Plymouth Fury 3 Coupe, or have any ideas on something that would fill the gap between the 2 windows. Thanks

Back in September I had a FB Marketplace 4-door LeBaron shipped from Maine to me in Indiana. Original Burnished Red Metallic paint, quite worn in places and surface rust in others, Champagne top, and interior in Parchment. Has its original window sticker and other paperwork, sold at Johnson...

For Sale: 1962 CHRYSLER IMPERIAL CROWN COUPE - $19,900 - Stone Mountain, GA 1962 CHRYSLER IMPERIAL for sale by owner - Stone Mountain, GA - craigslist Seller's Description: 1962 IMPERIAL CROWN COUPE…only 1,010 produced! 1-OWNER FOR 27+ YEARS. RECEIPTS FOR OVER $40,000 IN RESTORATION &...

Hi, everyone! I've wanted an Imperial since before I could drive. I know a lot of Mopar fans hate demolition derbies, but as a child at the county fair, I became obsessed with the one car that just would not die! I had to know everything about the car that could take any hit and keep going. That...

Hi, everyone! I've wanted an Imperial since before I could drive. I know a lot of Mopar fans hate demolition derbies, but as a child at the county fair, I became obsessed with the one car that just would not die! I had to know everything about the car that could take any hit and keep going. That...

Anybody have a good lead on new/replacement door window channel? I’d like a part number. I’ve called places like Metro Moulded, but they usually expect the customer to ID which trim (part number) fits.

I would like to replace the door belt mouldings on my four door hardtop (Chrysler part number 3759471 Drivers door). I realize the mouldings are obsolete; just wondering if anyone knows of a suitable replacement, especially if replacement would include the chrome edge; included on the original...

Might consider registering this over at the Online Imperial Club at Online Imperial Club (OIC) for Imperial, Chrysler Imperial, and Chrysler New Yorker Brougham Enthusiasts. All kinds of information and help from members. Beautiful car by the way. In the process of freshening my 73 as well.

This ride has been in our family since new in 1967. 383 engine, 727 transmission. It has not run in 25+ years, covered/tarped in all that time, California car, standard aged rust for a 55+ year old car. $5,000 obo I am selling this family heirloom because it is too expensive to restore. And I...