Search results for query: window removal

Unless you are well versed with the removal and installation of the window motor/window regulator I would leave it alone and let a mechanic work on it. Formal window motors can take fingers off if you don't know what you are doing. I would recommend buying both FSM's on EBay or a copy from...

The Monaco doors closed with a crash also. All door seals and stops were rock hard and disintegrated upon removal. I'll adjust windows and doors if necessary after I get the new rubber installed. New roof rail seal helped the window rattle at door slam already.

When new, the black "fuzz" seemed to minimize air "noise" there. With time and age, that fuzz goes away with use. I moves with the glass. I believe there are two dowels which hold it to the glass? There might be an illustration in one of the online parts books or FSM at www.mymopar.com . It...

In my very first post on the car in this thread, I detailed what my intentions on the car were going to be. Here'$ what I've accomplished over the past three years of the thread: -Trunk carpet and finish panels. Also included a new tire, powder-coating the wheel, jack base and the metal tire...

Hey guys, thanks, this looks like an awesome forum. Before I joined I spent half an hour reading about how to avoid finger loss on the power window motor removal thread after my new 66 Crown rear passenger decided to close itself just before a major downpour! Got the car about three weeks ago...

Yes, I'm counting on that. Just going slowly with the trim removal. The side parts and bottom piece having been glued in or sealed with silicon, the risk of bending it is pretty good if I don't go real slow. Once the trim is off, I'll make a map of everything on paper, get the window out and...

...not even flaking). Vinyl top is shot, probably 4 quarter size rust bubbles which tells me possibly some metal work, and probably window removal to do the repair. ATC1 but not charged, drove nice. Appears to be under 50K original miles, but no confirmation. Radiator was pushing out fluid...

helloooo there ya all, im am late in the game on this car and discussion, does anyone know if it sold and including the owner here if you get my post? Whats with the back window? Im trying to get a gasket foe mine as I think it needs removal to repair some rust and im told that there is no...

I think cities push developers to create HOA's. Outsourcing code enforcement and more they couldn't control via codes. 2¢ I know of several, they range from, what, we've got an HOA? to the ones you read about. 10 or 15 years ago there was great story about "dollyman" who went to war over...

Owning a 68 Chrysler and been there.. Get the proper tool to remove the trim around the window or "screen". I did use a screwdriver in the past and regretted it when the unicorn trim got bent or marked from the screwdriver. Remove the bottom trin along the front screen cowl.There are screws on...

The last picture looks familiar. Rust beginning in the holes around the roof trim. But it looks like the back seat is still in the car. We removed mine to get to the side panels for removal. Did you attach a visegrip to the window crank to get to the nuts on the roof trim.

Not sure what’s up with this particular car but you may want to send him a message if you’ve not already. As far as I’ve ever known, there isn’t so much a manufactured seal for the rear window, just a butyl type strip, some clips and the trim. Good luck with the aluminum... I’m afraid I’ve never...

That blows! Send them a $400 bill for scratching your alloy wheel. Just how much are we talking about for the privilege of living in their estate.

Purely anecdotal, and focusing more on the website than the science... A few months ago, one of my kids was on Facebook and knew I was looking for a gaming computer for my youngest. She saw an ad, clicked on it, found a site with several models of high end gaming laptops, and in an effort to...

i was planning to do Mr.Cs puck rebuild of my power window motors on my convertibles rear quarter windows. I have the FSM but am I bit confused on how this process works for window motor and regulator removal. Yes I know the regulator may break my fingers after removing the motor. Or so I've...

Can help you with the motors. The regulators? I don't even want to think about it. Ugh...

...it hasn't allowed the inner or rocker/trunk to rot, but the remains of the vinyl probably helped keep water out for a long while. Window removal should be subbed out to a pro. Just more/less flat and 90 degree metal that's in an easy place to work. Your finishing skills don't even have to be...

Thankyou for your detailed information, Does the vinyl go in under rear screen rubber ? I have a new rear screen rubber that is a Steele product, says it fits 67 68 Chrysler 4 door hardtop. I got it from an ebay listing that said 67 - 68 Imperial 4 door hardtop, but looking up the original...

These are hard to price without photo's. 2dr or 4dr? The minor tic at idle is probably nothing to worry about, especially if the car has sat for a few days, probably just a lifter that had leaked down. The ATC is a major problem as parts are getting hard to come by and this system was not...

...The new part I had was for a ventless front window and by its length, would have gone around the entire window channel necessitating window removal. When I started to dismantle the window given the great advice here, something didn’t look right. There was no old rotten felt in the front...