Search results for query: window removal

So I need so guidance please.. I need to pull the driver side window regulator and motor. The motor works, I can hear it, but the window doesn’t move. I’ve been directed to the threads that show rebuilding the gearbox on the motor, which I’m assuming is the problem in my case. If possible, I...

I could try to do this Mike It’s not fun but not too bad either

These models almost never show up anymore and I find this one appears to be in much better than average condition. The price is not $3000 too high - in the condition of this car, it is being sold at a price below market IMO. You many not like these models, but a lot of us really like them...

I'm talking about the inside trim, specifically the strip that is between the window and the package tray.

Redoing the power windows on my 78 Newport. Decided to take the windows hot to replace the window molding. Any suggestions on how to remove the window? Seems to be a plastic clip/nut the Phillip screw goes into, but it spins with the screw? Thanks!!!!

My trunk is weak in the same areas. The issues with my window channel extend a good 1/4" beyond the lip of the trim into the dutchman's panel ... also out toward the sail panel on the driver side. It's pretty crappy but I'll pick away at it. I remember seeing a thread on that Monaco. Not...

Evening fellas, I don’t want to start another thread regarding removing my window motor and regulator for my 77 NYB, Maybe you fellas can point me in the right direction. I’ve read a few other threads on how to rebuild the pucks inside the motor, but I’m looking for “direction / How too” on how...

More updates on the top restoration. 1. the metal work on the rust repair is finished, thanks to @71Polara383. It seems that the trim doesn't fit the corner as tightly as it should on the driver's side as it does the passenger's side. The pictures I had from before the top came off show that...

any information on how to remove door panel on a 1972 Fury. I can see clips around outside and screw for window winder, but cannot see anything to release the middle section where the door handle is. Is it a case of when the clips around the edge are off, you lift the panel off? Don’t want to...

The current air cleaner is a whole lot better than the previous even before rust removal and repainting it. The front side window is again operating correctly after repositioning the door panel.:) The tape is to be trimmed before the first time out on the roads this year.

Call one of the established restoration/hot rod shops and ask who does theirs, they usually farm out the glass. Joey's only uses champion auto glass up here. A smaller, incredibly clean shop ran by a father, 40 years experience, and his son, probably ten fifteen years experience now, great guys...

Window glass stays in the door. Once the fasteners that hold the regulator are loose, you then slide it out of the tracks and fish it out of the hole at the bottom of the door. It helps to have an assistant hold the glass for you.

For the vent window gaskets try and find a car being parted out in a northern area of the world....somewhere that gets lots of rain and cold....the gaskets survive much better from these areas. I have read about people "rejuvenating" old gaskets with brake fluid??....but know nothing about the...

Progress .... panel in but I forgot to set the pull down springs.... so....much cussing followed by removal of rear drive connection and setting the springs. Then came the adjustment Rear window trim is an almost perfect match to the new top material. Rear trim panel (one piece) fit like...

Dominion Glass here in town called me back saying they had located a new back glass in the USA and were working out a shipped to Calgary price. So in the end I may end up having 3 replacements available. Have you ever taken the back window out of a mid 70's B Body? Curious if the window trim...

Javier did you have to pull the whole headliner to access the sunroof for adjustment? Pics and details if you have any please. Thx

Not just formals!

I didn't realize when I ordered these they were re manufactured motor without reduction gear, if I had realize it I would have ordered the Summit motors. Fortunately my gears where very good shape and I just moved them over to the new motor. I greatly improved my removal time to a half hour...

I am wondering how the back window is held in on my 67 polara 2dr hardtop. I want to say it was glued in but wanted to doublecheck before I tear into it tomorrow. If it has a seal are they still available? Thanks in advance.

Need some help on proper method on removing the leading edge chrome & rubber strip that’s attached to the rear door glass. It’s the piece that, when front and rear window are fully raised, forms a seal between the windows. I’m unsure what it’s called, but it appears it may just be attached with...