Search results for query: hanger

I have a pair of front leaf spring hangers and a pair of rear leaf spring mounting brackets and shackles from a 64 Chrysler. $20.00 each hanger and each shackle assembly. Shipping additional from El Dorado Hills, Ca. PM me if interested in these parts.

Good Afternoon Would you happen to have the bracket that the double strap hanger attaches to? They would be ideal is someone wanted to convert a single system to duels. The rubber straps can also be renewed using discarded truck mud flaps. Omni

...John the South Park Boys are a favorite meme in the motorcycle forums/groups when we feel like roasting the RUBS. The latest have been the Ape Hanger crowd posting up 'Look at mine' pictures in posts about a classic stock bike, which then morph into full blown pictures of choppers of the...

...good news, especially given the amount time it had been sitting on ramps. Unfortunately, I found some more damage. The driver side leaf spring hanger is inverted and punctured the trunk pan, and where it bolts to the frame on the other side, the spring itself is bent. So, I will either be...

someone on gag-bay has it and says it is for NORS FRONT TAIL PIPE SUPPORT HANGER FOR; CHRYSLER,DODGE,DESOTO,PLYMOUTH 1955-59 ,6 & 8 CYL. DODGE,PLYMOUTH 1959 (CAN.)W/ 6CYL. same as 1881685

For sale - Handcrafted reproduction #3403038 dual exhaust tip hangers. These hangers are patterned from an original NOS hanger and are exact in measurements and fitment. They are hand cut, hand bent, and assembled by me in my tiny shop. All hangers are made with a correct NOS rubber isolator...

On factory equipped dual exhaust Fuselage cars, I am wondering what the left side hangers looked like. There are no provisions for a hanger by the muffler, so I assume they had a bolt on hanger up on the shock crossmember, holding the tailpipe where it kicks up, similar to the one on the right...

Thanks for your response. So, if I'm understanding that correctly, they serve no functional purpose in the running of the engine. The reason I ask is that, as I mentioned in the original post, one of them (on the passenger side head) was kind floating around in there, not attached to anything. I...

Just a few on ebay NOS 1971-1974 Dodge,Plymouth 383-340 b-body Exhaust Hanger With Chrome Tips | eBay 1971 72 73 74 Plymouth Dodge B-body EXHAUST TIP HANGER Pair NOS Rubber Insulator | eBay 1968 69 70 71 72 Plymouth Dodge A-body EXHAUST TIP HANGER Pair 'Cuda Dart Duster | eBay I don't see...

...Are the vent lines both open, like you can blow air through with an air hose? Carburetor cleaner might help full/partial clogs Can a coat hanger be pushed into the vent ports and not come out with any debris? Carburetor cleaner will also help. Gunk is a good brand. The vent lines are...

Last month Ron and I went to Sacramento to see the car being put into the administration building. The car was waiting outside the hanger where it had been kept. We wiped the car down while we waited for them to be ready. I didn't get there in time to see the Camaro being taken out. Prior to...

No I don't. If I remember right it was a welded on bracket.

Its rougher than it looks in the photos. I thought the grille would be a great wall hanger.

...bucket and see what you've got. Whether it's rebuildable. With a bucket you can hang some of the assemblies into the carb cleaner from the top edge of the bucket using a coat hanger. That way some of the stuff is suspended and not sitting on the bottom. It just helps things not to get tangled up.

...idea of what it might be worth and where I could list it to sell it? 75 New Yorker Brougham a little over 117k miles. has sat in an airport hanger for 8 years till I pulled it out. has a 440 and auto 3 speed it dose run but needs some tlc before I would road it. TLC- new hoses, belts...

Yes, but if the reproduce a different hanger with the same rubber then you should be able to swap it out. Or find an NOS or used hanger that has the same rubber and swap it. I bet the same rubber is used on other hangers. Alan

...has some scratches. It probably will fit other models since it's on the common 5 3/4" knob centers, but, you may have to modify your rear hanger bracket a bit. Not an easy radio to find anymore, so, don't miss out. $250 delivered to a U.S. address only, or, $225 picked up here in San Diego. I...

...laying on the ground, I unbolt the front. If you can get at the spring eye bolt, just undo and pull out. If you can't just pull the front hanger off with the 4 nuts. Slide the new spring into place and put the bolt through the spring eye. Leave this loose. I like to jack the rear end up...

I was admiring the nice job that was done when the dual exhaust was put on even the bump in the tailpipe exit but then I saw the original hanger on the passenger side and then the way the use solid plates on the drivers.... Not good. Can't find them and this isn't a good pic but if you know...

I agree that you don't need a torque shaft assembly. I used a TTI 2.5inch with HP manifolds in my 1970 440 Fury. Everything fit OK except driver side over axle hanger. They sent 2 and neither fit. Had to fabricate. Also, rear of tailpipes needed to be outside the subframe, not inside.