Search results for query: *

Hi,its a 1970 Polara, this is the original item,removed due to a short on the indicator side. Item is the spring loaded wheeled plunger, on the replacement (Standard TR7)it's a spring loaded brass plunger that scrapes on the ring, just wondering if anyone has done anything?

Is it possible to replace the horn contact on an aftermarket column switch assy? Fed up with the plunger scraping and jamming, thinking along the lines of a carbon plunger, powdrill brush block thing.

one question, the carb base gasket, between carb and manifold, which thickness?

well in a moment of boredem I boldly went where many cack handed buffoons had been before me. Got the carb stripped, cleaned and sitting on the bench,the main damage was the missing screw head of the choke butterfly and a slightly bent butterfly, the remaining screw came out with some fiddling...

Well the carb on my 1970 318 Polara has finally given up. It's only 50 years old for goodness sake, don't make them like they used to.....etc,etc...(butterfly screw head vanished, leaking from shaft etc ) So I need a replacement for a Carter 2249/2027 (4895S) plenty around but which to avoid? Is...

that's the really annoying thing about it, starts on the button,hot or cold,drives beautifully, kick down and goes, just don't know when its not going to. I also locked the heat riser open thinking it was heat related vapor lock, but temps ambient temps are down again, going to try it with a...

Replaced the pump earlier this year, cleaned lines,tank. replaced filter no obvious leaks. Beginning to get a little tedious. Have ordered new filter,seals etc even voltage regulator.

My puller weighs about 2kg with a stubby handle

The ongoing saga of engine cutting out....1970 318 Polara auto, once again the Polara died,as usual at a busy junction.So here's what I found after a bunch of folk helped push it clear. Spark at plugs Plugs were dry Had residual fuel pressure at the carb fuel inlet. Near empty float chamber. We...

Had nothing to lose so I flattened the air horn down with the old wet and dry paper on thick glass trick. Now seals a treat,car starts on the button and runs beautifully, got a Paddington hard stare from the Boss when I social distanced from the lights I feel the main problem had been the...

SOOO.. after doing my back in changing the points etc I decided to attack the carb. slight weeps at joints and flooding, after cleaning I spotted the obvious. the top of the carb is bowed at a couple of places. Quite badly across the front ( float end). What replacement carb should I look for...

well the heat riser was stuck closed, with broken springs. now locked open, not like its going to be used in cold conditions. Also found the float has failed so not surprising it flooded. Just waiting for mr Fed Ex to decide if he's going to deliver. :thumbsup: oh and this cursed plague to go...

Hmm.. I fitted a new pump last year when the original one started draining down.

Ah yes! forgot about this. Its not seized but not free, may be the problem, is it possible to tell its position in situ? I was tempted to remove it when I found it seized but it freed off,only to start sticking again.

Chatting with a local guy with an MG, his does this but clears after the car has been used for a few days, he thinks the float sticks due to residue..

1970 318 Polara auto, Carter BBD. Its been a problem for a while, I've tried cleaning carb and tank, fresh needles, check float height etc but the carb still floods after the engine has been run, i.e start the engine, let it run /drive for a while till warm shut down, the carb floods to the...

Finally figured out how to post a photo. It's on here somewhere

hey folks, sorry its been a while

still having issues with a fuel weep from the carb joints so I'll be stripping it again ( found someone with an ultrasonic cleaner so it'll be taking a bath as well ). question is do I use sealant on the body joints? don't want to go down the tweak the screws route. I intend to try to reface the...