Search results for query: *

I have what may be a NOS or a VERY near perfect turn signal lens for 76-78 NYB. No crazing No cracks a prime example suitable for a 3D mold template if you want to print some for everyone. These are hard to come by, and most driving around have Chips/ Cracks and Crazing. Check out the pictures...

My 76 NYB 440, runs fine until it is really warmed up. It developed this after a highway run. Now, every time I drive her, she runs fine until well warmed up then the engine begins to stumble and miss finally stalling completely. Once she stalls there is no restarting. The starter just turns the...

Looking for suggested areas to look at curing my 76 NYB stalling. She runs fine for about 2 miles then struggles and finally stalls. Wait for a while and she's good for about 2 miles and does the same thing. Thought it was maybe a clogged fuel filter starving her, so I replaced it. Same result...

My 76 NYB has a VERY hot fan switch when set at any speed higher than low. Any idea what the issue is and how to fix it?

Hi all, Just curious if the AC hoses are the same for any 440 equipped car? I have a 76 NYB and repro hoses are available for B bodies, will they fit?

Hi All, Any ideas how to fix the odometer in my 76 NYB? Speedometer still works smoothly, so it's not the cable. The reset knob still turns and resets the trip odometer. Help is appreciated. Mark

Anyone have a solid Dutchman panel for my 76 NYB? Mine has a small hole and I don't want the rust to get ahead of me.

Anyone have a solid Dutchman panel for my 76 NYB? Mine has a small hole and I don't want the rust to get ahead of me.

My 76 NYB recently lost ALL electrical. I changed the flashers for the hazards and the turn signals, when I put everything back together and tested them with a loose connection at the battery the flashers worked fine. The terminal connection at the battery was still loose when I tried to start...

Hi All, Where is the blower motor resistor located in a 76 NYB? It's NOT an auto-temp system. I still get all the speeds, but the switch gets VERY hot!!!!! Thanks Mark

While changing the wheel bearings this past weekend on my 76 NYB, I took a look underneath to see if there were any issues that need addressing. It appears, there is what seems to be a catalytic converter in my exhaust system. I was under the impression that they were not CAT vehicles in 76...

Spent the weekend lifting the front end and replacing the wheel bearings! What a difference in just the sound of the car on the road! On a different note: Does anyone know why I have what looks like a factory hole in the middle point of the front bumper? I've looked at other cars and they don't...

Is there a way to install intermittent wipers on a non-intermittent wiper 76 New Yorker? I'm tired of flipping the switch back and forth. If possible is it a simple job?

76 NYB - Thought my fan speed switch was bad because the fan would occasionally change speeds with the switch but would get REALLY HOT. I replaced the switch and the fan works in all speeds now, BUT, still gets REALLY HOT!!! So hot it hurts to touch. Afraid of burning wires, is there something...

Saw this on ebay. NOS MoPar 1974-1978 Chrysler Newport NewYorker Brougham red DASHPAD P405RR6 | eBay There is a grey one too. 1978 CHRYSLER NEW YORKER BROUGHAM DASH PAD,CLEAN! NO CRACKS! GREY! 61K. | eBay

76 NYB need the windshield washer reservoir with the pump …… any ideas?

Anyone know of, or have, a white driver door arm rest for my 76 New Yorker 2 dr? Mine has a split.

Always been a Mopar fan, used to drive my 49 Plymouth as a daily driver. Now the 76 New Yorker will be my date night car! Location: Jacksonville, FL