Search results for query: *

difficult to see but on the right (yellow wire) i see something like fasten belts and on the left I see lock doors or something like that.

do you know where the yellow wire on the last photo is coming from / going to? thanks

GREAT THANKS!

THANKS, no more searching then :). If somebody has a photo of the back of the dash/instrument panel of the 69, I would be interested to see it...

Hi there fellow mopar worriers Checked and cleaned my instrument panel light dimmer switch and looks to be working OK. Checked at the instrument panel fuse and there seems to be OK as well. After some work today I only found the 2 lights that are above the instrument panel (photo with 2 red...

THANKS, enough info to work with. MUCH appreciated

car is running this is with running engine, choke pull-off works. Is the choke plate open enough you think?

Hi there, When the engine / intake is warmed up the choke plate is open like in this picture. Should it open more? If so, what could I do about it? The choke thermostat seems to be in good order, but could pull a little bit down more to open the choke plate a little bit more. Or should that be...

Hi there! Looking for smooth operating: 8 3/4 axle adjuster / retainer. Item as per photo. Shipping to the netherlands, Thanks, pieter

possibly these numbers. Thanks. Chrysler, dodge, imperial 69 70 2945610 2935340 2935338 2999122 3695510 2999004

you know what mopar numbers i have to look for? 69 and 70 will be good?

Looking for a passenger side mirror for my 69 Chrysler 300. Condition not really important. Let me know if you have something. Below could be the same but not sure. Dodge/Chrysler/Imperial mirrors in 1969-1970. Really looking forward to look in the passenger mirror this summer :) Maybe these...

Any play in the bearings? How do you judge them? Thanks, Pieter

It need to fit into this upper steering column housing assembly. There is no rubber there.... From what I have read this is 68/69 only. Maybe it's sold only as an assembly and not a separate bearing.

looking for 69 upper column bearing (housing assembly) - chrysler I re-greased it but there is still play in it. Mopar # 569 8362 GM # 5698375 (67 68 gto chevell nova cutlass camaro) Anyone have something available? And any information on the lower bearing? Which part number (s)? I can...

Looking for: 69 (68/70) driver side - hinge/side cover - power bucket seat for chrysler 300 green, but any color would work.... Badly damaged is also an option... If you have the chrome trim only, i would also be interested... Let me know. Can provide an UPS shipping address if needed...

I think the number that could be found on the radio would be 2884095. my e-mail is pieter@oudolf.nl Thanks :)

Is the front section suppose to look like this without the bumper guards? Or would the bottom section touch each other when the car originally come without the bumper guard? If I would like to buy a bumper guard would it fit on or need holes to be drilled? is this the whole part i need...

HI THERE, ANY LUCK? thanks, Pieter

your inbox is full. But let me know. It needs to have the 8track because then it will fit the 'cutout' in the dash. Looking forward to your reply, Pieter