Search results for query: *

Hello, I am Jim Dent. I haven't been on here for quite some time but I find myself needing learned assistance on an ignition/starting issue on my 1973 Plymouth Fury. I cannot get the motor to start. It turns over just fine but the electrical connection that supplys the spark is not there...

1973 Plymouth Fury 2, 440, four door sedan. Looks like it takes a # SMP24529DG headlight wiring harness for a # Q628TY replacement headlight switch. Regardless of whether these numbers are correct to your files lets say that I do believe them to be correct for my purposes. I have looked high...

i need a good used (right) passenger side fresh air door vent cable handle ***'y. It is about 1.5' in length and actuates a metal air cone thingee used to bring fresh air into the cabin from the passenger side thru the heat/cold levers using a vacuum system. It is a simple plastic finger pull...

I have had a dozen of these made up. It was factory placed on the dashboard of the 73 Fury 2 police car we are rebuilding. I don't know how many different years and models it was installed in. If you would like one please send $15.00 to my PayPal acct and send your mailing address to me at E...

Hello, does anyone out there have a complete original fender radio antenna ***'y for a 73 Fury for sale at a good price? Would prefer a good used straight three section if available. Don't think I can afford a nos one but you can quote me. Thank you Jim Dent (seagraves26@aol.com or 859...

Hello again, Does anyone have a mopar parts number for the cork gasket that embeds in the flat side of the heater core support frame? It is about 20" long by 10" wide and about 3/16" thick. I see images of it in the Mopar chassis blue book but I cannot find a parts number. Also looking for...

Looking for a used but in good condition front bumper license plate holder and the finger grab (winder button) that goes on the factory dashboard clock stem. Thank you, Jim Dent

I really need a pair of new factory original fit type wiper blades for my 73 Fury. I need the rubber in the blade holder with the straight factory pin all the way across . Anybody out there got a pair available? Thank you, Jim Dent

Looking for a correctly fitting set of wiper blade refills that mount on the center pivoting pin, a reference to correctly fitting after market with its stock number would also be helpful. I am looking for the complete wiper arm assembly, not the rubber refill. Thank you, Jim Dent

I need the insert for a 1973 Plymouth Fury 3 steering wheel. It is the three spoke plastic style and has the horn blowing contacts located in the three outer spoke edges. I also need the correct screws that attach it to the wheel and the nut that holds the steering wheel on. If you have a...

I am looking for a replacement rectangular plastic lens cover for the roof courtesy light for a 73 Ply Fury. Dorman make many of these items but does not have any of them listed for Chrysler use, just GM. Does anybody out there have a correct OEM or excellent used lens or a correct Dorman...

I am looking for a 1978 Plymouth Volare or a 1979 Dodge Aspen four door sedan to make a police clone out of. Our department used both of these but I can't find any for sale out there and I am a little surprised by that. Can anyone direct me to a site similar to forcbodiesonly that might list...

Has anyone got a n.o.s or darn clean set of used battery cables out there for a 1973 fury 440? If not, can anyone give me an ides where to look or the correct parts numbers for same? . Also looking for a n.o.s or darn good used odometer cable ***'y for same. Will take a parts number for this...

Does anyone out there have a clean, usable used single or matched pair of fender mirrors that will work on the '73 Fury for sale? Also looking for the four wheel well s/steel trim strips. Thank you, Jim Dent

Would like to find decent used but reasonably priced dash clock for 1973 Plymouth Fury 2 and all four wheel opening s/steel liners for same. Thank you, Jim Dent

I need a large narrow black plastic piece that fits exposed directly behind the closed hood and below the windshield chrome trim. It goes from one side of the engine compartment to the other and between the rear top portions of the front fenders. I have absolutely no idea what it is correctly...

Does anyone out here know where I can find a new factory correct fitting Mopar radiator C body for my 1973 ? Everything aftermarket from Champion will not mount correct in the radiator mounting holes. Also I have what I believe to be the correct 7 blade 440 hp fan on the motor and the blades...

I am Jim Dent, I am in central Kentucky. I have a 1973 Plymouth Fury 2 Police car with its original 440 c.i. PK package originally out of South Carolina for sale. It is not all that rough but it will require a complete cosmetic and mechanical restoration inside and out. This is a nice project...

Weatherstripping Problems: I am having a very hard time locating replacement door weatherstripping, factory or after- market, for the four doors on my 1973 Plymouth Fury 2 four door sedan cop car. If anyone has this item for sale or can lead me in the right direction I would very much...

I am having a really difficult time finding a correct body bushing kit for a 1973 Plymouth Fury 3, 4 door sedan, 440 motor. I can't find a Mopar or a Poly replacement. I found one for a 2 door but everybody that had one said that it would not work on a 4 door. Anybody got a clue as to who...