Search results for query: *

1973 440 with Forged crank, Stock LY rods, TRW L 2266F .030 pistons. At the point of ordering my final parts before assembly and trying to decide whether I should be going towards and Fluid Damper or sticking with a stock style Dampener. So I'd like some opinions, up till now I've always used...

My Achilles heel admittedly is camshaft selection. The specs of this particular engine are a 73 440 truck block, 452 heads, standard bore. Craptastic compression (8.2:1?) I just want to get it running, and healthy. It's a temporary engine at best... I've toyed with the idea of something...

In planning for the rebirth of my 69 convertible, I have come to the point of engine. The car it's self is (was) a E44 318 2 barrel car. When I purchased it, it had a 78 360 in it. I sold it and found a good used 69 318 that had previously been rebuilt. At this point I've spent too much time...

Looking for advice and information on the TQ. I know that they came in different CFM's, however when I have tried to research them, I haven't found any good information about the applications that used what. I'm in need of 3 of them, one for a 73 440 HP, one for a 74 360HP, and one for a 318 4...

Quick question, would picking one up be worth it for parts for an A833? Noticed one for sale local. Nick

Found a 5spd out of a ram fairly cheap....I don't know much about them, but is it possible to mate it to a 440? As much as I want to just do a A833 4spd, I wouldn't mind better driveability of having an O/D or 5th gear. Nick

Looking for I formation on the A833's. Here's what I'm looking to know, what are the exact differences between the B body and C body unit? I'm really having a hankering to cut a hole in a trans hump. Nick

First off, what was the last year that trucks had Forged cranks? I ask because what I have here appears to be a late 1975 440 with a forged crank. Casting date is 9/26/75, block number is 4006630-440-10 On the pad above the rail it has 6C122042 Top pad shows 6T440 F below that is 12 4...

Bit frustrated, ordered new bearings, .010 underbore to match what came out, new bearings in, greased of course, with the caps torqued, I can't rotate it, pulled the caps, measured the bearings versus each other, anyway, off my micrometer old 0.0965 new 0.1015 The old ones are most likely the...

So I know the specification of the factory '73 U code 440, but what would you guys suggest as a mild step up in performance? Factory U code is 0.464" Exh. Valve Lift; 0.449" Int. Valve Lift; Hydraulic; (050) Duration at .050 Lobe Lift; 225 Exh.; 214 Int.; 115 Degrees Lobe Separation A...

Just wondering if anyone has any experience with these, buddy of mine has one forsale. Nick

I'm getting to the point where I have questions for my respected fellow C Body enthusiasts. Some will be stupid, I work on fuel injection all day. Carbs and distributers I've never been taught. The girlfriend and her mom convinced me finally that a 4 barrel is the way to go for my 318. (I'm...

I picked a duration with help from an extremely experienced and knowledgeable friend, but I wanted opinions on brand and models of cams. Who should I trust basically. Nick

What size socket do I need for the Crank bolt? So I can set the #1 to TDC New Double Roller Timing chain and sprockets, new valve stem seals, and some good cleaning............oh yeah, a few cans of Chrysler Corp. Blue. Nick

Where the hell does the throttle cable attach correctly, been trying to get it right for 2 days now, theres a hold down on the side of the bracket that holds the throttle linkage rod running to the transmission, a picture of this bracket with the cable in it would be PERFECT. I think that is...

Previous owner told me a few times it was the original engine, I want to know for sure. How do I decode the numbers, I know where they are located. Nick

So I've been scowering the local yards and have only found one 1989 Power Ram that has a 360, and fairly low mileage, it happens to be in a yard that I know the owner of pretty well and he's willing to cut me a very good deal on them. Question is will these work or should I continue my search...