For Sale 1957 dodge trim

Status
Not open for further replies.

W.Weiland

Active Member
Joined
Nov 5, 2017
Messages
244
Reaction score
150
Location
Lordstown OH
Feedback: 2 / 0 / 0
Contact seller
these are from a collection i recently aquirred
i had to buy the whole lot to get items i needed
these are rechromed and pretty nice not 100% knockout but 85% maybe better
all from a 2 door hardtop
fin tips at front of quarter for the pair 275$ shipped lower 48
knights badges go on quarters near the rear 300$ shipped lower 48
pair of headlight eyebrow divider trims 160$ shipped lower 48

C6DF815A-3A79-4969-9B50-995C878E880E.jpeg


64F58252-C8B6-4C2D-A13A-8557FCF12EBD.jpeg


E168C8F1-2478-439E-A6DA-ECE2B11388B9.jpeg


76E2A519-C1B2-4EF2-A4D1-596B980EC83D.jpeg


54CF08F4-F743-4BDF-A1FE-23B77B0D7FB4.jpeg


036BC849-BF93-4D0D-A2FE-33C950BEAAA9.jpeg


EB1C0D00-BAE1-41BC-A8EF-DDE063BB956A.jpeg


B82EE193-0109-4DA5-99B8-FC3083855C15.jpeg


B16A1967-7ADE-4443-AB6D-30980358CCA7.jpeg
 
On those eyebrow dividers you sold any 57-58 Dodge I owned never had what I assume were holes through for mounting screws.
Do you know why the difference?
 
On those eyebrow dividers you sold any 57-58 Dodge I owned never had what I assume were holes through for mounting screws.
Do you know why the difference?
i was quite baffled at that as well. my 57 custom royal did not have them but a 57 custom royal d500 i bought did. those came off of that. my guess is production change/ plant/ improvement. they screwed to the outer eyebrow trim that went down outside of fender. whereas the 57 cr i got had a stud in middle of fender in which the divivder screwed into then the outer trim slid into it
 
Status
Not open for further replies.
Back
Top