1962 Chrysler 300 413 2x4 Inline Dual Quad Air Filters

larry4261

New Member
Joined
Jan 5, 2023
Messages
39
Reaction score
41
Location
Greenfield, WI 53220
Can anyone advise who sells the small oval air filters for the 413 Dual Quad Air Cleaners? I think the part number is 1852569?
807-024(x2)_C-1.jpg
 
NAPA Gold 2083, Carquest 87083 fit the '60 Chrysler 300F, but I'm not sure if that is the same filter. EDIT: Those are round and you want an oval.

I checked that Mopar #.

Air filter cross reference
 
Last edited:
I have 2 of these CA 161PL.
8C7F36A8-1CA7-466C-92B5-C03255086B81.jpeg
5E73087A-A681-4D9D-8459-0E42BBD7AA65.jpeg
 
I was actually looking for the ones that were only about 2.25 inches tall. How much do you want for the 2 you have?
Ask him in a PM. Let's keep this thread informational and not turn it into a sale thread.
 
I would check with the Boys at the Chrysler 300 club ....the ca161pl fits the "Canted" silenced air cleaner found on the single four barrel New Yorkers etc. 57 to 58 . The thinner ones are CA163pl ... I picked up a set of those for my '58 Fury from a 300 club member in Chicago.
 
The 161’s are 3.5” tall.
 
I found a filter from a different car that fits quite nicely but you need to form it a bit.
But it fits quite nicely and seems to hold it shape.
I've never used them, though, so if they choke the airflow I cannot say.


I'll need to do some digging to find what height it is, and part#.
 
I found a filter from a different car that fits quite nicely but you need to form it a bit.
But it fits quite nicely and seems to hold it shape.
I've never used them, though, so if they choke the airflow I cannot say.


I'll need to do some digging to find what height it is, and part#.
Thanks for the feedback. I actually just scored 4 or the correct filters.
Thanks for your research.
 
Back
Top