PL45G0D288554 is for sale in WI, so @70 Sport Suburban may have some info about it. No fender tag, only a VIN tag, but looks like FF4 "Lime Green Iridescent" paint with an (optional on 2-row wagons) D2F8 green vinyl bench seat interior. The SS grille must have been added, though the ad does not say so (apologies for the caps):
"
ONLY 62,000 MILES ON CAR
RUST FREE GA CAR
MOSTLY ORIGINAL PAINT
TAILGATE SWINGS AND FOLDS PROPERLY
FACTORY OPTIONS: A/C, POWER DRUM BRAKES, POWER STEERING,
POWER REAR WINDOW (WORKS W/KEY AND SWITCH)
ENGINE: 402/435 HP MOPAR CRATE ENGINE W/DEMON 750 CARB $12,700.
125 NOS INSTALLED BUT NOT YET WORKING
TRANS: “BUILT” 727 W/TRANS COOLER
NEW 3” DUAL EXHAUST
DIFF: 373 POSI AND ADCO REAR SWAY BAR
NEEDS: HEATER CORE (CURRENTLY BYPASSED)
A/C RECHARGE AND NEW BLOWER MOTOR SWITCH
NOS NOT YET WORKING
FRONT CARPET NEEDS REPLACING
(...) This 4.00" stroker engine generates a whopping 435 horsepower and 457 ft.-Ibs. of torque at 4500 rpm, and will make believers out of everyone in a hurry. The 402 Magnum features big valve Magnum R/T cylinder heads and stainless steel valves. Drop one in and let 'er rip. For maximum performance, Mopar Performance recommends the use of a 750 cfm Holley Carburetor (P4349228 - available through Mopar) and 1 7/8" Exhaust Headers (not available through Mopar).
Crate engines that change the emissions performance of the vehicle may not be legal for use on vehicles regulated for highway use in California and other states. Horsepower and torque rating based on test engine. Ratings may vary on individual engines.
Specifications:
Built with all-new components
4.00" bore/4.00" stroke
9.0:1 compression ratio
Big valve Magnum R/T Cylinder Heads
Distinctive Mopar Performance Cast Aluminum Valve Covers
2.02" intake and 1.625" Exhaust Valves
Heavy-duty Valve Springs
288°/292° duration, 0.501"/0.513" lift Hydraulic Roller Camshaft
Single plane, M1® 4-bbl Aluminum Intake Manifold (includes bosses for MPI conversion) taller than stock - check hood clearance
Double Roller Timing Chain and Sprockets
8-quart center sump street/strip Oil Pan
Mopar Performance Electronic Ignition Kit with distributor
Externally balanced as a Magnum engine, the following components required for proper balancing (not included): P5249843
Balance Weight and Positioning Template Package, P5249842 Cast Crank Flywheel
"
"
ONLY 62,000 MILES ON CAR
RUST FREE GA CAR
MOSTLY ORIGINAL PAINT
TAILGATE SWINGS AND FOLDS PROPERLY
FACTORY OPTIONS: A/C, POWER DRUM BRAKES, POWER STEERING,
POWER REAR WINDOW (WORKS W/KEY AND SWITCH)
ENGINE: 402/435 HP MOPAR CRATE ENGINE W/DEMON 750 CARB $12,700.
125 NOS INSTALLED BUT NOT YET WORKING
TRANS: “BUILT” 727 W/TRANS COOLER
NEW 3” DUAL EXHAUST
DIFF: 373 POSI AND ADCO REAR SWAY BAR
NEEDS: HEATER CORE (CURRENTLY BYPASSED)
A/C RECHARGE AND NEW BLOWER MOTOR SWITCH
NOS NOT YET WORKING
FRONT CARPET NEEDS REPLACING
(...) This 4.00" stroker engine generates a whopping 435 horsepower and 457 ft.-Ibs. of torque at 4500 rpm, and will make believers out of everyone in a hurry. The 402 Magnum features big valve Magnum R/T cylinder heads and stainless steel valves. Drop one in and let 'er rip. For maximum performance, Mopar Performance recommends the use of a 750 cfm Holley Carburetor (P4349228 - available through Mopar) and 1 7/8" Exhaust Headers (not available through Mopar).
Crate engines that change the emissions performance of the vehicle may not be legal for use on vehicles regulated for highway use in California and other states. Horsepower and torque rating based on test engine. Ratings may vary on individual engines.
Specifications:
Built with all-new components
4.00" bore/4.00" stroke
9.0:1 compression ratio
Big valve Magnum R/T Cylinder Heads
Distinctive Mopar Performance Cast Aluminum Valve Covers
2.02" intake and 1.625" Exhaust Valves
Heavy-duty Valve Springs
288°/292° duration, 0.501"/0.513" lift Hydraulic Roller Camshaft
Single plane, M1® 4-bbl Aluminum Intake Manifold (includes bosses for MPI conversion) taller than stock - check hood clearance
Double Roller Timing Chain and Sprockets
8-quart center sump street/strip Oil Pan
Mopar Performance Electronic Ignition Kit with distributor
Externally balanced as a Magnum engine, the following components required for proper balancing (not included): P5249843
Balance Weight and Positioning Template Package, P5249842 Cast Crank Flywheel
"