RagTop66
Active Member
Has anyone ever used these? Seems too good to be true.
Dodge Monaco & Polara 65-66 Lower Quarter Panel 2 Door
Dodge Monaco & Polara 65-66 Lower Quarter Panel 2 Door
Have you used them? I know I read a thread that talked about the C2C panels being poor quality, but this seems to be a different company.Not good!!
I’d be glad to if I knew they would work. Since no one would want to bankroll my experiment, I doubt I’ll be the Ginny pigThe panel in the photo does seem to match the contours of the car. Some of the C2C panels don't even look close to what they are supposed to be.
I checked C2C's website and they don't show quarters for '65-'66 full size Dodge, so they must be made by someone else.
I would certainly say that the panel in the photo should be better than making your own from scratch. Of course a good used one would be best, but by the time you factor in shipping, you'd be close to two grand for a quarter from out west these days.
If no one chimes in with experience, then maybe you can be our test subject and give them a try. If they are decent, there's plenty of people here that could use a set on their cars.
Jeff
Thanks Ross. Were they poorly shaped? Just curious because looking at the picture, it looks promising.I am chiming in with experience. Garbage.