WANTED Defroster nozzle Dodge Polar 1965

Status
Not open for further replies.

markitzero

New Member
Joined
Jun 16, 2020
Messages
37
Reaction score
17
Location
Northern Germany
Feedback: 0 / 0 / 0
Contact seller
Hi guys,

I'm looking for the defroster nozzle for the driver's side.
Unfortunately mine is broken.
Would be nice if someone had such a part.

Best regards
Frank
 
Hi guys,

I'm looking for the defroster nozzle for the driver's side.
Unfortunately mine is broken.
Would be nice if someone had such a part.

Best regards
Frank
I would go to Murray Park for these personally or maybe @C Body Bob
 
Unfortunately those nozzles get very brittle after 50 years. I have an entire extra dash for parts for my car. Both nozzles in my car and the spares were broken at the attachment points. I had to get creative with some JB Weld to re-install them.
 
They're a lightweight, fragile plastic duct under the dash that take the round hose input and fan it out through the dash and up over the windshield.
Kinda like these (from ebay)
upload_2020-11-4_9-28-44.png


priced exorbitantly at 150.00 I might add
 
I do have a pair of those in decent condition.
 
Ok not quite as decent as I thought. These are from a ‘67 Imperial. I knew about the cracks but had forgotten about the missing piece on the one. $25 + shipping for the pair.

20DDCAA2-5B65-400B-8504-D34C86BA423F.jpeg
2B882D20-66EC-49CE-9DD3-BE5AEF3CDDCA.jpeg
A4D5DFD6-97FA-4318-820B-C008F3C9A1D1.jpeg
 
Look just like mine did.
J B-Weld and some steel washers fixed them.
 
What’s your zip/postal code?
 
Status
Not open for further replies.
Back
Top