Furyus67
Active Member
I am swapping my 318 LA for a 318 magnum in my 1967 Fury III 2dr hardtop. I opted to stick with the stock cam. Doing so I am going to use a fuel pump rather than use the cam snout bolt or getting a long snout cam to run the mechanical fuel pump. I have never installed an electric pump before and I am searching for the right place to mount it. I have read that you should mount it on the frame back near the tank but, make sure to keep it lower than the tank.
I am a little lost as to where to put it. has anyone every hooked up an electrip pump on a C-Body? Does anyone have pictures!?
I have inserted some pictures below of my car. Hopefully they aren't too confusing to figure out the angle of the photo. The Fuel line goes out towards the passenger side, then runs on the outside of the frame , then more towards the middle of the car it comes back inside the frame
I am a little lost as to where to put it. has anyone every hooked up an electrip pump on a C-Body? Does anyone have pictures!?
I have inserted some pictures below of my car. Hopefully they aren't too confusing to figure out the angle of the photo. The Fuel line goes out towards the passenger side, then runs on the outside of the frame , then more towards the middle of the car it comes back inside the frame