Knurl size

B2fast87

New Member
Joined
Jul 16, 2020
Messages
14
Reaction score
2
Location
Saskatchewan
Anyone know the stud size, knurl size of the 8 3/4 diff axle studs with drums. 1967 fury 3. Need to go a little longer, could pound them out and measure the knurl but I have the interior out redoing and running out of time, just thought I would ask
Thanks
 
Shoulder Length (In) 0.563 In.
Thread Size 1/2-20
Thread Direction Clockwise
Thread Diameter 0.5 in
Splined Bore Diameter 0.673 IN
Length 1.594 IN
 
I have LEFTIES and Righties --- all N.O.S. -- but being stock, I don't have any "longer" unless there happens to be a longer one in that same pattern with as you ask, with the same knurl pattern....

If I can be of help, always best to simply call me ---
Craig --- 516 - 485 - 1935.....
If you can call for FREE... If not, leave your number in this thread, I CAN call Canada for FREE, eh ???
(That eh??? Was for you !!!! So you feel at home...)
 
try Dorman 610-446 They are a smidge bigger in the knurl, but will work with a press.Only thing I could find that will work. 75 cents at RA.

merge_from_ofoct.jpg
 
A number in the 400s that is actually NOT metric.....
Wonder what that fits??
All my studs are 610-037, 610-085, 610-135...etc...
All #s in the zeroes, and 100s !!!!!!
All for from the 1930s - to - about 1972 !!!!!!

Of course at 75¢ each, you won't cry if they don't work... That's for sure...
 
A number in the 400s that is actually NOT metric.....
Wonder what that fits??
All my studs are 610-037, 610-085, 610-135...etc...
All #s in the zeroes, and 100s !!!!!!
All for from the 1930s - to - about 1972 !!!!!!

Of course at 75¢ each, you won't cry if they don't work... That's for sure...
here you go

Capture.JPG
 
Back
Top