Last edited:
The taller domes were used on the 1970 - 73 models for sure, and some say into 1974 as well. The shorter domes were used in 1974 through at least 1978 I believe , all of these being on C bodies. All of the domes in this period used on C bodies were 2 pieces. The missing caps are serrated on the taller, earlier domes and look much like the AMC caps, but are not the same - the caps are a little wider than the AMC built in caps. I don't think the quality of the chrome/metal was much different between the two series of Chrysler caps, and the pitting you see are probably more a function of the environment they have been in rather than the quality of the plating. Just my obversations over time.
I sent you a PM about them.
You lucky dog. Good 70-73 centres are like hens teeth.
The dome on the right isn't a '70-1?That is for the 70/71 cap , not the ones pictured
You lost me Dave, according to Chrysler terminology there are 2 domes, and 1 cap in that picture. The "dome" on right isn't a '70-1?We're talking caps here
I believe the dome on teh right is a 70-74, based on comparing that picture to one in my basement.That's why I hi-lighted the cap in the parts book picture.
What is the dome on the right in the OP's picture?
In Steves post he said that the taller dome(the one on the right in the OP's picture) was for '70-'73's.