72 Furyguy
New Member
- Joined
- Mar 27, 2014
- Messages
- 20
- Reaction score
- 1
Ok...so I have a problem....I decided to put new points in the fury....new coil...plugs...wires...cap...rotor all done already and no problems for at least a week....then yesterday I decided to change points and condenser just to have new stuff....old points kinda worn...NOW THE DAMN CAR LOADS UP...RUNS LIKE CRAP...WONT IDLE...ECT...I have to keep about half throttle to keep her running. tons of black smoke.... I am totally baffled why it wont run at least half way decent. All ignition parts are from NAPA. I set the points to .017..... on the high part of the cam lobe. Also is there a way to set the dwell and how to you accurately check the dwell. I see no adjustment can be made like on a chevy with the little window in the cap.....HELP HELP HELP. totally confused........thanks
Last edited: