Rear wheel seal - 1970 Chrysler 300

[Waggy]

The rear seal was leaking on my 1970 Chrysler 300 brake drums, so I went to the parts shop to get a new seal. I was told to remove the old one and bring it in. I removed the seal and in doing so damaged the area with the part number. I can read 1546 but the parts people cannot match it. Parts person got me a 19000 seal and it was the wrong size and shape. Any ideas where I could find the correct number? I am about to try pulling the other side and see if I can read the number without removing it.

I thought I would post this first, so I might have two chances to get the number.

Thanks everyone. I have found it 15460 Chrysler 2881185

 

[commando1]

There's your numbers right there.
With that number they can cross reference it to their brand.

 

[65Fury440]

Sounds like a job for Napa!

 

[Waggy]

Napa got me the wrong one and could not find the correct one. They were very helpful.

 

[Waggy]

View attachment 75130

There's your numbers right there.
With that number they can cross reference it to their brand.

Thanks, I will try that.