Hello;
I read through the threads about opening dormant tailgates if the power window will not lower.
I have the opposite problem. My power window is down in the tailgate, which can open. I need to remove the glass so I can access fasteners for the trim. The shop manual says to remove the interior trim and remove the glass roller lock washers, which I have done. Next I am supposed to remove the arm pins from the glass rollers - How is this done? They are stuck in the rollers.
I have tried prying in a number of ways on the pins with no luck, can't get to forceful as I don't want to break the glass. Access is extremely limited, and I cant raise the glass with the tailgate open.
Any suggestions?
Thank you.
Mark
I read through the threads about opening dormant tailgates if the power window will not lower.
I have the opposite problem. My power window is down in the tailgate, which can open. I need to remove the glass so I can access fasteners for the trim. The shop manual says to remove the interior trim and remove the glass roller lock washers, which I have done. Next I am supposed to remove the arm pins from the glass rollers - How is this done? They are stuck in the rollers.
I have tried prying in a number of ways on the pins with no luck, can't get to forceful as I don't want to break the glass. Access is extremely limited, and I cant raise the glass with the tailgate open.
Any suggestions?
Thank you.
Mark