Trunk extension panels 1966-1967 C-body

[robert.k]

Any one used Year-OnePart Number: EX66LHRH reproduction trunk extension panels 1966-1967 B-body in a C-body

 

[commando1]

A B-body ANYTHING will not work on a C as far as body parts. You have to fab your own on just about everything or find a parts car with the usable metal you need.

Posted via Topify on Android

 

[robert.k]

The Drain plug is in the same location and same shape (round with a flat bit) and the pressed lines look close. I only need the lower portion !
I was wondering about the profile near the wheel well opening ?

 

[67Monaco]

It might could be close. But a little shrink here a little stretch there and you can make it fit.

 

[greasemonkeyman]

What part are you looking for and for what car?

 

[67Monaco]

He's looking for a trunk extension for a Slab.

 

[patrick66]

Good luck finding a useable one. "B" does not equal "C" here. Yeah, they may look the same, but the quarter dimensions are not close! The location of the drain hole is irrelevant.

You'll be better off finding a good sheetmetal guy and have him fab one up for you, as I guarantee if you try to use that "B"-body part, you're going to have more work in that in trying to make that piece fit that hole, than if you simply have one made from scratch.

 

[67Monaco]

Isn't that what I said??

 

[commando1]

Wait!!! Let's go back to post #2...

Posted via Topify on Android

 

[patrick66]

Wait, let's go back to post #2...wait, let's go back to post #9...WAIT!