WANTED Valve Covers

[mpgmike]

Looking for a pair of big block valve covers that incorporate the PCV valve to retrofit to an older engine. Mine came with the draft tube. Located in northern NJ.

 

[mpgmike]

It has the 4 studs in the heads for the valve covers.

 

[bluefury361]

It has the 4 studs in the heads for the valve covers.

Sounds like a poly engine. "A" 303,313,318. What is called a big block is a "B" or "RB" engine.
What kind of a vehicle is it in.....?

 

[mpgmike]

It is a 413 RB in a 1959 Imperial. Not the old Poly.

 

[bluefury361]

It is a 413 RB in a 1959 Imperial. Not the old Poly.

Thanks. I'm guessing you need the 4 bolt mount valve covers as used on the very early "B" engines. It may be tough to locate a pair of them with provision for a PCV. Most used a road draft tube such as you mentioned.
I believe a pair of later 6 hole covers will work for you.

 

[moper]

I'm reasonably certain you can use any 6 bolt covers on the 4 bolt heads.

 

[mpgmike]

I'm willing to gamble on a low-buck set. Any offers? Got sand blaster and powder coater, so a little rust doesn't scare me.

 

[bluefury361]

http://www.ebay.com/itm/Mopar-Dodge...s-5-/261971225455?hash=item3cfeb3ab6f&vxp=mtr

 

[mpgmike]

I believe I may have found a set.

 

[67-Fury]

I have a pair from a 66 383.