I'm not quite sure about the correct terminology but I'm attempting to convert my 2 forced air heaters to wireless operation but the on line operational descriptions don't seem to provide a solution. Last summer we replaced both A/H-Heat Pump units with a A/C only units rendering the old dual zone Comfort Control thermostat non-functional. Heater control was lost.
Last winter, a basic Dometic thermostat (2) was hard wired to each furnace. Due to the limited mounting locations, this isn't very satisfactory for heat balance so I'm looking for a wireless system that will allow me to locate 2 thermostats. fore and aft locations, for better temperature control. While many "wireless" thermostats are available, the "wireless" part seems to be only between the operator and the thermostat, not between the thermostat and the furnace. Hardwiring the furnace and thermostat isn't an option.
Solutions welcomed.
Last winter, a basic Dometic thermostat (2) was hard wired to each furnace. Due to the limited mounting locations, this isn't very satisfactory for heat balance so I'm looking for a wireless system that will allow me to locate 2 thermostats. fore and aft locations, for better temperature control. While many "wireless" thermostats are available, the "wireless" part seems to be only between the operator and the thermostat, not between the thermostat and the furnace. Hardwiring the furnace and thermostat isn't an option.
Solutions welcomed.