croderique
New Member
Hello, I’m working on the 1964 Chrysler 300 “383”. I have drained the antifreeze, but can’t get more than about 2.5 gallons out, even running the engine for a few minutes.
The Shop Service manual says it holds 16 quarts + 1 for heater. That would be 4.25 gallons.
I have drained 2.5 gallons then used a cleaner, ran for 30 minutes, drained another 2.5 gallons. Repeat, and repeat again without a cleaner. Still not clear water coming out as it is mixing with the water left over. How do I get the rest of the fluid out? I did not remove the thermostat since you have to move the AC compressor and yes using distilled water.
Any hints would be appreciated.
Thanks
Chuck
The Shop Service manual says it holds 16 quarts + 1 for heater. That would be 4.25 gallons.
I have drained 2.5 gallons then used a cleaner, ran for 30 minutes, drained another 2.5 gallons. Repeat, and repeat again without a cleaner. Still not clear water coming out as it is mixing with the water left over. How do I get the rest of the fluid out? I did not remove the thermostat since you have to move the AC compressor and yes using distilled water.
Any hints would be appreciated.
Thanks
Chuck