For Sale 1965 sport fury console car- whole or parting out

[Valiantmope1]

I have most of this car and several good pieces left- complete dash, rear glass, complete console with shifter (carpet is not on it), decent no rust hood, decent no rust decklid (no rust but needs a little straightening along the latch edge), complete suspension and subframe (V8 drum brake car) a seized but very complete poly 318 with 727 cable shift automatic, steering column, side glass is out of car. The rear axle is an open 3.23 8.75 and is complete as well. Car has no title but I got it in a trade and am using pieces for my 65 SF restoration.

I will be harvesting the lower quarter and trunk pieces out of it and most of the trim, but I do have spares. Front floors are rotten but rears are primo.

I have access to the seats (very decent shape- at my buddies house) and doors but car was hit on the drivers side so the fender on that side is gone, and I need the passenger fender. some things I might be able to mail out, but the majority will need to be sorted out on how to get to you. Ask me what you want and I will price it. I will try to get some photos up soon and if there is any interest.

 

[rapidtrans]

Tach in console?

 

[Valiantmope1]

Tach in console?

no sorry, regular clear lens. but I believe it is in great shape. The cover plate is a little pitted too- nice driver quality.

 

[65sporty]

Rear bumper?

 

[Valiantmope1]

Rear bumper?

Yes I do have that- still on the car too. I will get some pics. Its in decent shape if I recall and straight but let me check first.

 

[tdenkler]

have gas tank? please email me
[email protected]

 

[Valiantmope1]

have gas tank? please email me
[email protected]

Yes i do, and while it is great on the inside, it has a dent and all that blobby undercoating on the outside. Since I had two tanks i just took the better of the two. It may be missing that one little 1/4" nipple vent too- all completely serviceable issues by a competent radiator/tank shop for a reasonable fee. However, it holds gas just fine too, and it is currently empty so i can see it inside with a light. My buddy has it down at his yard, so tomorrow or the next day he will bring it up and i can get some pictures of it, inside and out. I will email pics and we can go from there- stay tuned.

 

[Valiantmope1]

Rear bumper?

Yes i do-
very straight and solid (i didn't see hardly any old lady dings or twists), but it is a candidate for re-chrome, as it has a large flake of chrome missing from behind the license plate exposing it to surface rust. It is more of a driver unit in my opinion, but it is still on the car and ready to be harvested, along with brackets etc if you need them. It is a desert car out of Oklahoma somewhere so the sheet metal is really nice (except for the floors). too dark tonight to take a pic but i will see if i can get you some in the AM.

 

[65Fury440]

PM sent

 

[Valiantmope1]

Yes i do, and while it is great on the inside, it has a dent and all that blobby undercoating on the outside. Since I had two tanks i just took the better of the two. It may be missing that one little 1/4" nipple vent too- all completely serviceable issues by a competent radiator/tank shop for a reasonable fee. However, it holds gas just fine too, and it is currently empty so i can see it inside with a light. My buddy has it down at his yard, so tomorrow or the next day he will bring it up and i can get some pictures of it, inside and out. I will email pics and we can go from there- stay tuned.

I just sent you an email- let me know if you got the pics ok.
Thanks!

 

[Valiantmope1]

Yes i do-
very straight and solid (i didn't see hardly any old lady dings or twists), but it is a candidate for re-chrome, as it has a large flake of chrome missing from behind the license plate exposing it to surface rust. It is more of a driver unit in my opinion, but it is still on the car and ready to be harvested, along with brackets etc if you need them. It is a desert car out of Oklahoma somewhere so the sheet metal is really nice (except for the floors). too dark tonight to take a pic but i will see if i can get you some in the AM.

Sorry for the delay- here are some pics, let me know if you are interested.

 

[Jakenks]

rear floor pan same as a 65 Chrysler 300?

 

[Valiantmope1]

rear floor pan same as a 65 Chrysler 300?

Should be. How much of it do you need? Both sides? I can get pics if you are interested.

 

[Jakenks]

Should be. How much of it do you need? Both sides? I can get pics if you are interested.

I need the right side passenger back seat footwell. Mostly around where the plastic plug is. Can get pics later. Yes, I'd like to see pics also.

 

[Valiantmope1]

I need the right side passenger back seat footwell. Mostly around where the plastic plug is. Can get pics later. Yes, I'd like to see pics also.

As you can see the passenger rear side is very solid. A little bumped up in the middle but will flatten once cut out. Drivers side not so much. Tell me where to cut and how much you want to spend and we can go from there.

 

[Jakenks]

As you can see the passenger rear side is very solid. A little bumped up in the middle but will flatten once cut out. Drivers side not so much. Tell me where to cut and how much you want to spend and we can go from there.
View attachment 123927 View attachment 123928

looks nice, sorry no computer this weekend. I will measure how much I need.

 

[Valiantmope1]

Ok. Sounds good. I will mark it and take pics before i do cut it. Let me know when you know.
Thanks!

 

[Jakenks]

the area outlined in red

 

[Valiantmope1]

How much up the sides vertically do you want?

 

[Jakenks]

enough for some ability to trim to fit. two-three inches?