I pulled the trigger on 2019 Scat Pack Charger

[commando1]

The FN HOA would probably call the EPA police if I cleaned it up in front of my hose! LOL!

No such rules at the FUHOA.

 

[1978 NYB]

No such rules at the FUHOA.

LOL!

 

[300rag]

One thing I noticed with my Scat Pack was how dirty the engine compartment is after only having it for 2 months. There is more dirt and dust under the hood then my 18 Ram has after 1.5 years. The only thing I can think of is the functional hood scoop is and both grill air inlets and the bottom of the engine compartment brings in a lot of air for cooling and brings in a lot of dust and dirt. Oh well, a can or 2 of Engine Gunk and a trip to self car wash with a wand with fix it right up.

Just imagine the mess that can be in there with 3 holes in the hood, one centre inlet and two heat extractors. I need to wipe down after every time it gets wet out. Then, I was trying to find a spot for a catch can.

 

[1978 NYB]

Just imagine the mess that can be in there with 3 holes in the hood, one centre inlet and two heat extractors. I need to wipe down after every time it gets wet out. Then, I was trying to find a spot for a catch can.

View attachment 295242

View attachment 295243

Peter, check out Billet Technology. They have a solution for your catch can. They also have a couple of video's on their website. You can call them too to make sure you get the right stuff.

 

[1978 NYB]

 

[1978 NYB]

Billet Technology | Modern Mopar Billet Accesories

 

[300rag]

Peter, check out Billet Technology. They have a solution for your catch can. They also have a couple of video's on their website. You can call them too to make sure you get the right stuff.

View attachment 295245

Challenger one can work, but the Jeep/Durango one doesn't look promising. The spot they usually go has an interference issue with the rain shield on the sport hood.

 

[1978 NYB]

This was so funny I had to post it here too! LOL!

 

[1978 NYB]

Challenger one can work, but the Jeep/Durango one doesn't look promising. The spot they usually go has an interference issue with the rain shield on the sport hood.

View attachment 295259

View attachment 295254

Call Nick at Billet Technology. Friendly guy that has the best solution for your car and likes to help people.

 

[commando1]

That says, 10 Year Extended Platinum Plus Warranty to me.

 

[azblackhemi]

That says, 10 Year Extended Platinum Plus Warranty to me.

View attachment 295291

Or trade it in on a new one after the warranty expires.

 

[300rag]

Call Nick at Billet Technology. Friendly guy that has the best solution for your car and likes to help people.

Called them this morning. No solution for the Durango at this time. He says they are working on it. The only option for my Challenger is to use the fender bracket.

 

[Stormer]

Catch can is not a go-fast part. Neither is a pretty cap for the washer fluid. Wanna have some fun? Torque converter is your best bang for the buck.

 

[1978 NYB]

Catch can is not a go-fast part. Neither is a pretty cap for the washer fluid. Wanna have some fun? Torque converter is your best bang for the buck.

My Scat Pack has a factory stall converter already.

And a factory line lock and launch mode.....

 

[1978 NYB]

2019 Dodge Charger SRT Hellcat Octane Edition fuels the blackout trend

 

[70bigblockdodge]

Catch can is not a go-fast part. Neither is a pretty cap for the washer fluid. Wanna have some fun? Torque converter is your best bang for the buck.

Sticky tires is easier and much needed.

 

[1978 NYB]

Sticky tires is easier and much needed.

Yep, I could knock a lot of time off the 60' time with slicks.

 

[1978 NYB]

Even jacking up the car is a PITA!

To start there is no jack!

And then you have to get some special adapter for the pinch weld area.

 

[Don Stolfi]

I pulled the trigger on a 2019 Scat Pack Charger. 6.4L hemi with a line lock and launch control. 8 speed torqueflite. It runs 12.6 seconds @ 115 mph in the quarter mile. I traded the 300C in on it.

View attachment 279066

Wow, sweet!

 

[1978 NYB]

Coming soon.....

Wide body Charger?