For Sale 1969 Chrysler 300 convertible for parts

Hi David, here are some pics of the parts, the Top switch is nice, its tight and actuates firmly and crisply. The wiper blades are in good condition, I had to check through 3 sets to find a good pair. The washer bottle isn't so good. If you look in the pictures, the bottle is starting to crack up to the right of the motor and also above the lid in the second pic. If you still want it, make an offer on it. I will want $35 for the switch and $25 for the wiper blade assys.

View attachment 376970 View attachment 376971 View attachment 376972 View attachment 376973
Convertible top switch is in very good shape. Sold. the wiper blade assemb. are useable, but are not 1969 OEM. So they would cause problems in judging at car shows. Here is a pair of photos as you can see not the same. If you have a pair like mine pictured, send me a photo. If usable I take them. The washer bottle is a little sketchy, I'll take it.

DSC03471.JPG


DSC03472.JPG
 
Convertible top switch is in very good shape. Sold. the wiper blade assemb. are useable, but are not 1969 OEM. So they would cause problems in judging at car shows. Here is a pair of photos as you can see not the same. If you have a pair like mine pictured, send me a photo. If usable I take them. The washer bottle is a little sketchy, I'll take it.

View attachment 377135

View attachment 377136
I will look through the rest I have and get back to you on the wiper blades. I think the type you show have a release tang on top near the pivot. Will get back to you tomorrow.
 
Convertible top switch is in very good shape. Sold. the wiper blade assemb. are useable, but are not 1969 OEM. So they would cause problems in judging at car shows. Here is a pair of photos as you can see not the same. If you have a pair like mine pictured, send me a photo. If usable I take them. The washer bottle is a little sketchy, I'll take it.

View attachment 377135

View attachment 377136
Okay, I found five of your type in my stockpile, but only two that I consider to be in good condition, the two pictured are still good with only a little bit of side play in them. They are not loose and sloppy like worn ones can get. I would like $10ea for them and i will throw the washer bottle in for free as I am not sure it will survive the trip without damage.

wiper blades.jpg
 
Sold, thanks for going the extra mile for the wiper blade assemblies. By my calculations the total is 55.00 plus the ride. Can fire a check off first thing tomorrow if that's OK. PM me the total price and ship info Thanks for your help.
 
Sold, thanks for going the extra mile for the wiper blade assemblies. By my calculations the total is 55.00 plus the ride. Can fire a check off first thing tomorrow if that's OK. PM me the total price and ship info Thanks for your help.
Will PM you a shipping cost to your zip code too once i have calculated it.
 
@C Sickness here is a pic of the letters, there is one E missing, three of the letters only have one stud, the rest are intact. Some of the letters show some slight pickling around the back edge. Other than that they are in good condition.

letters.jpg
 
Right side tail light lens......? to 36535

thanks
Will.
Will, the tail light assemblies are in very good condition and I would like to sell each one as a unit rather than pull them apart. One side would be $55, let me get a pic of the assy for you.
 
How about the window "whiskers"...the felt peices?

Did you sell the brake booster and MC? Thanks!!
MM, not sure what part is the felt pieces? Can you supply a pic of yours? As for the booster, it is gone, I sold the disk brake system out of the car.
 
It's the felt that goes against the windows. Need for all 4 windows, (front/back). You can see the slots that it attaches to. I'm missing these pieces. Trying to complete. Thanks!

20200521_153540.jpg


20200521_153559.jpg


20200521_153618.jpg


20200521_153631.jpg


20200521_153645.jpg
 
Ah I see, the window felts yes, I beleive you can buy these new , check this link for an example.
Window Felts 69-70 Fury Convertible w/Vent Window

I had seen these before. List as fitting '69 Fury 'vert, I have a '69 300 'vert. Are you saying these would fit? I could of sworn I contacted this company before, and they either were not sure/clear. I can't remember now. Let me know. Thanks!

opps… just re-read your post...you stated as an example.
 
I had seen these before. List as fitting '69 Fury 'vert, I have a '69 300 'vert. Are you saying these would fit? I could of sworn I contacted this company before, and they either were not sure/clear. I can't remember now. Let me know. Thanks!

opps… just re-read your post...you stated as an example.
I can check with the cars I have here, I am pretty sure they would be the same. Best to start a thread putting the question out there though.
 
I can check with the cars I have here, I am pretty sure they would be the same. Best to start a thread putting the question out there though.
Your inbox is full. I need interior screws. All the screws for the trim on the inside of the windshield and all of the screws that hold the plastic trim on the bucket seats. myersd@wowway.com
 
Will, the tail light assemblies are in very good condition and I would like to sell each one as a unit rather than pull them apart. One side would be $55, let me get a pic of the assy for you.

thanks Gary. All I need is a lense to complete my set. I'm looking to make a lighted wall hanger.
 
Still have the Dutch panel and the convertible top drip rail?
I haven't forgotten you, I will get stuck into it this week., it was raining all week last week. One question, do you want the whole drip rail intact from the back edge of the doors?
 
I haven't forgotten you, I will get stuck into it this week., it was raining all week last week. One question, do you want the whole drip rail intact from the back edge of the doors?
Cool, no rush. I’m not sure what you mean, the drip rail doesn’t extend to the doors, does it?
 
Back
Top