Search results for query: *

Was planning on putting the new 727 trans today still am but I was gonna just swap in the “nox control unit”(?) but the threads are all beat up from transport or something but do I really need it. Reading around I see that some people don’t put it on?

Getting ready to put the trans back in the Polara just getting my measurements right so I have some questions 1: should I replace the original flex plate for the 727 since it came off my spare 360. It looked slightly warped but what is a direct replacement for it and what grade hardware should...

Just got my rebuilt 727 and 904 (that I may list for sale if anyone is interested) from the shop and now its time to prepare to plop it in. When I was removing the coolant lines I accidentally twisted one of the stubborn fittings but it was for the best since once of the previous owners swapped...

Driving back home late the 904 that’s paired to my 360 wouldn’t want to shift out of first and left a trail on fluid from a leak on the main seal caused from what I assume is the flexplate pushing the tq into it and bending the seal in. I have a spare 360 with a 727 from a 4 Door 72 Polara and...

Been something I’ve been dealing with for some time, the whole steering column moves up and down the steering coupler.

Had my seats reupholstered some time back and my passenger seat tends to fall off of the side pin because it sits flush I’m not sure what to do, I was thinking to either tap and thread a nut and washer but I’m limited in size or to weld a spacer and a washer but then if I had to remove the upper...

Finishing some interior and I needed to change out my driver A pillar plastic piece since mine is missing a chunk where it visible so I got and painted the good one from my 4 door parts car and it just won’t fit like if the windshield is at a different angle than the 2 door.

Hello everyone, I’ve been leaning on eventually building a new engine and transmission for my 72 Polara, as of recent my a904 is taking its sweet time to go into reverse and sometimes drive. The current engine is a 360 and healthy so I’ll drive it till it can’t. But I have an itch for more. I...

Looking for a new rear view mirror for my 72 polara that since the original is tarnished all around the edges,

a few weeks ago I drove the car and I got some smoke but complete forgot to go into why and it turns out brake fluid is leaking right onto my exhaust so thank goodness I got home safe but defined do not want to drive it until it’s fixed or changed out completely it looks to come from where the...

Looking to replace my front caliper if possible. Not really sure on how to read for part numbers so I included photos of what I assume them to be.(first is passenger side and second is driver side. The rest are just photos of how it looks like with the two pins) I’ve seen a few of them online...

I have a 1972 polara with the passenger side missing one of the rollers which leaves to swing side to side. I have a 4 door parts car that I want to take the roller from but after getting the front disc to turn it doesn’t feel like it’s getting loose. Is there a specific way to remove them or...

I’ve been wanting to finish up the interior on my 72 polara for some time now but I want to finish the doors by getting all of the rubber weather trim or whatever else Is needed so as little water as possible gets in the doors since I really don’t want trapped water to start causing rust inside...

Currently falling through a rabbit hole trying to diagnose why the passenger side front brake was smoking after a drive home. At first I realized that the eBay rotors I bought were rubbing and grinding itself against the ring around the spindle so after ordering the proper ones from oreilys and...

Looking for the window roller hardware. I just keep finding stuff for e body’s and whatnot. Does anyone know where to source a set?

After driving fine all day when I was parking it, it would idle way higher than before. Once turned off and back on the idle speed would just climb up to 1k when it used to be 400. The previous owners did leave a mess of washers and welds but I can’t find any part where It might get snagged.

Trying to install the steering rag joint coupler but I don’t have enough clearance. When I bought the car it had a universal unit installed and bolted the wheel to the power steering directly but I want to finally get the steering wheel straight but I can’t get the new coupler to fit. I already...

Needing to replace a missing window glass roller for my 1972 polara but I only keep seeing some for e body’s. Does anyone know if they would work or where I can get a set?

Hey guys, previously when I first installed a tach to my polara, the wire that lights up the tach was wrapped around the instrument cluster lights fuse and I really wouldn’t want an electrical fire to be the end of my car so where would you guys recommend splicing it into?

I already got the lower seat done but Im not sure how the back rest is supposed to go. Does the prong for in front of behind the sheetmetal insert?